07-30-2015, 08:16 AM
Greetings,
I was attempting to mod SLIC2.1 table onto my BIOS using AndyP's SLIC tool:
http://forums.mydigitallife.info/threads...EFI-BIOSes
I believe i selected the wrong mode: SSV2; should have had selected dynamic mode instead that update existing SLIC2.0 table to 2.1
Initially, there was one beep then follow by two beeps. I assumed I might need to reset the BIOS before the new BIOS would worked. Thus I removed the CMOS battery and waited 5mins to power on the laptop. But, it got worst, now there is no beeps at all. the LCD indicators have the num lock, caps lock and scroll lock symbols flashing consistently - indicating the mainboard is bricked.
I downloaded CRISIS Recovery Disk Tool (WINCRISIS) and created the BIOS recovery USB boot drive:
https://www.bios-mods.com/bios-recovery/...-recovery/
Followed these instructions to the letter but no joy:
https://forum.ts.fujitsu.com/Forum/viewtopic.php?f=94&t=40926
the original is BIOS_data.rom and I renamed it to BIOS.WPH
I'm not 100% sure if it's a binary bios, but it should be the case (2048Kb). I attached the BIOS file, i'd appreciate if anyone can confirm this
I'm at wits' end and I'd be grateful for any input and assistance
Thanks very much
https://www.bios-mods.com/forum/attachment.php?aid=8983
I was attempting to mod SLIC2.1 table onto my BIOS using AndyP's SLIC tool:
http://forums.mydigitallife.info/threads...EFI-BIOSes
I believe i selected the wrong mode: SSV2; should have had selected dynamic mode instead that update existing SLIC2.0 table to 2.1
Initially, there was one beep then follow by two beeps. I assumed I might need to reset the BIOS before the new BIOS would worked. Thus I removed the CMOS battery and waited 5mins to power on the laptop. But, it got worst, now there is no beeps at all. the LCD indicators have the num lock, caps lock and scroll lock symbols flashing consistently - indicating the mainboard is bricked.
I downloaded CRISIS Recovery Disk Tool (WINCRISIS) and created the BIOS recovery USB boot drive:
https://www.bios-mods.com/bios-recovery/...-recovery/
Followed these instructions to the letter but no joy:
https://forum.ts.fujitsu.com/Forum/viewtopic.php?f=94&t=40926
the original is BIOS_data.rom and I renamed it to BIOS.WPH
I'm not 100% sure if it's a binary bios, but it should be the case (2048Kb). I attached the BIOS file, i'd appreciate if anyone can confirm this
I'm at wits' end and I'd be grateful for any input and assistance
Thanks very much
https://www.bios-mods.com/forum/attachment.php?aid=8983