![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
My EL1200 got a new motherboard, one for an EL1210. This gave me the ability to set the initial graphics device to pcie. Aside from the other features of the new board, that was the only bios upgrade sought. It was a smooth install and worked great.
An Acer bios update was unintentionally executed (windows based installer) on the new board. Thankfully, the system was able to start (remove pcie card & power, pull battery, press start button to drain any power...) but the update didn't terminate as it should have and the result is that the f2-setup interface is gone. All that appears is an f-12 option to select boot device.
Is this the correct forum to ask about what happened and for guidance?
An Acer bios update was unintentionally executed (windows based installer) on the new board. Thankfully, the system was able to start (remove pcie card & power, pull battery, press start button to drain any power...) but the update didn't terminate as it should have and the result is that the f2-setup interface is gone. All that appears is an f-12 option to select boot device.
Is this the correct forum to ask about what happened and for guidance?
![[Valid RSS]](valid-rss.png "Validate my RSS feed")