02-07-2017, 11:11 PM
So, I have gone through [censored] and have yet to find an answer. I'm trying to mod my Lenovo Y510p for the Wifi Card Upgrade. The problem is I cannot get my backup of my bios.
Bios type:
W25QQ16BV
W25Q32BV
Here are my results:
Read 1.0.2.1065 Error:
Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.
Read 8.1.10.1286 Error:
Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.
Write 9.5.14.1724 Error:
Error 280: Failed to disable write protection for the BIOS space!
Heres a download of my results: https://mega.nz/#!rFxjVZIC!5lCNAfpcxkj0l...LoGH1MohJg
I got that from running: NEW_BACKUP_FPTs.exe
Which can be found here: https://www.bios-mods.com/forum/Thread-R...egacy-mode
Not only did I try to run FPTw64.exe but I also tried: FPT_Backup_95
Found here: https://mega.nz/#!aIhhzTDK!y4BRrvsy2VqZZ...yzr9GMe55k
This gave me these results: http://imgur.com/tzKTvd7
but it also gave me Error 26. It says it succeeded at the bottom and said backup complete but does the error mean it's invalid/corrupt?
Note: The file back64bios.bin appeared. Is that the backup?
Error 26: The Host CPU does not have read access to the target flash area. To enable read access for this operation you must modify the descriptor settings to give host access to this region
Plz Help
Bios type:
W25QQ16BV
W25Q32BV
Here are my results:
Read 1.0.2.1065 Error:
Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.
Read 8.1.10.1286 Error:
Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.
Write 9.5.14.1724 Error:
Error 280: Failed to disable write protection for the BIOS space!
Heres a download of my results: https://mega.nz/#!rFxjVZIC!5lCNAfpcxkj0l...LoGH1MohJg
I got that from running: NEW_BACKUP_FPTs.exe
Which can be found here: https://www.bios-mods.com/forum/Thread-R...egacy-mode
Code:
C:\Users\bluel\Desktop
architecture = x64_
Intel (R) Flash Programming Tool. Version: 8.1.10.1286
Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.
Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.
Intel (R) Flash Programming Tool. Version: 9.5.14.1724
Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.
Platform: Intel(R) HM86 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid
--- Flash Devices Found ---
W25Q16BV ID:0xEF4015 Size: 2048KB (16384Kb)
W25Q32BV ID:0xEF4016 Size: 4096KB (32768Kb)
--- Flash Image Information --
Signature: VALID
Number of Flash Components: 2
Component 1 - 2048KB (16384Kb)
Component 2 - 4096KB (32768Kb)
Regions:
Descriptor - Base: 0x000000, Limit: 0x000FFF
BIOS - Base: 0x180000, Limit: 0x5FFFFF
ME - Base: 0x001000, Limit: 0x17FFFF
GbE - Not present
PDR - Not present
Master Region Access:
CPU/BIOS - ID: 0x0000, Read: 0x0B, Write: 0x0A
ME - ID: 0x0000, Read: 0x0D, Write: 0x0C
GbE - ID: 0x0118, Read: 0x08, Write: 0x08
Based on the Host Region FRACC the Host/CPU/BIOS has ( 0x00004A4B ) :
Read Write
Desc : Yes No
Host : Yes Yes
ME : No No
GbE : Yes Yes
PDR : No No
Total Accessable SPI Memory: 6144KB, Total Installed SPI Memory : 6144KB
FPT Operation Passed
Intel (R) Flash Programming Tool. Version: 1.0.2.1065
Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.
Error 201: [FPTw.exe] cannot be run on the current platform.
Please contact your vendor.
Not only did I try to run FPTw64.exe but I also tried: FPT_Backup_95
Found here: https://mega.nz/#!aIhhzTDK!y4BRrvsy2VqZZ...yzr9GMe55k
This gave me these results: http://imgur.com/tzKTvd7
but it also gave me Error 26. It says it succeeded at the bottom and said backup complete but does the error mean it's invalid/corrupt?
Note: The file back64bios.bin appeared. Is that the backup?
Error 26: The Host CPU does not have read access to the target flash area. To enable read access for this operation you must modify the descriptor settings to give host access to this region
Plz Help