MCP61PM-GM V2.2 AMI BIOS CPU SUPPORT

[Chillwitm888]

http://global-download.acer.com/GDFiles/...0702464192&Step1=DESKTOP&Step2=ET%20SERIES&Step3=ET1331G&OS=ALL&LC=en&BC=EMACHINES&SC=PA_6E
thats the bios link, it apparently is a AM2 socket board but the stock cpu is the AM3 235e Athlon II @ 35 w
i brought a Phenom II x6 1035t I read somewhere that people have made it work with this mobo

mobo says its 89 Watts max...? but this?

https://www.bios-mods.com/forum/Thread-N...35T-6-Core


can somebody please help with this?

[DeathBringer]

If it boots, you need additional cooling for chipset.

[Fruitypuddinpops]

I have Emachines ET1331G-)3w with a MCP61MP-GM v2.2 AMI Bios and would like to put an AMD 1045t in it.  But have not had any luck finding a bios that will work on this board.  I have tried the ones in the MCP61 thread to no luck.  I have come across an older thread showing that it is possible, but that thread ended in 2012 without the ROM being posted.

I have tried 3 different versions of AMIBCP editors and they all give the "Couldn't open the file" message.  Have also tried the MMTOOL V3.22 editor to try and the CPU IDs i need and I get a "The CPU MicroCode Patch file does not of proper" message (I wouldn't doubt that i am not using this one correctly though).

Im not looking to overclock, just wanting the CPU support.

[DeathBringer]

Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with supported CPU.
Make a photo of your motherboard.

[Fruitypuddinpops]

Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with supported CPU.
Make a photo of your motherboard.

I figured it out a few days later.  Had to force the BIOS flash with Winflash, then did a reinstall of Windows 7.  It recognizes the 1045T now, thank you for your reply.