09-26-2012, 06:42 PM
EVGA 780i SLI motherboard
unlock the remaining PCIe slots for primary GPU usage
Greetings!
Let me start by giving thanks to any and all who may read this. And my deepest gratitude to any and all who help me with this issue here.
(I will be as short as possible) I cannot use my PCIe #1 slot on my mother board. And the remaining two, are locked to SLI use only. The owner is forced to use the top most PCIe slot on this mother board. The other 2 slots do work and find the GPU's . But they move you to a locked screen informing you to move the card to slot #1 for non SLI use. I read in a post here a member had someone, one of your coding gods here, make a custom bios for him. And that it worked fine for him.
Im only in need of a unlock. All of my other settings are just fine.
I use both bios's the FTW and the regular one. (for the varying options)
So I will attach both bios's . I will leave it to whomever to decide on what one is easier to modify. And last, I understand this is use at my own risk. My only other option is to do some capacitor soldering. Im not scared to do that, its just tedious work for my. I have stupid fingers. Very bad dexterity. ;(
ftp://ftp.evga.com/bios/NF78P10.bin (regular)
ftp://ftp.evga.com/bios/E178_SZ17.exe (FTW bios)
Thanks again,
Orcinus
unlock the remaining PCIe slots for primary GPU usage
Greetings!
Let me start by giving thanks to any and all who may read this. And my deepest gratitude to any and all who help me with this issue here.
(I will be as short as possible) I cannot use my PCIe #1 slot on my mother board. And the remaining two, are locked to SLI use only. The owner is forced to use the top most PCIe slot on this mother board. The other 2 slots do work and find the GPU's . But they move you to a locked screen informing you to move the card to slot #1 for non SLI use. I read in a post here a member had someone, one of your coding gods here, make a custom bios for him. And that it worked fine for him.
Im only in need of a unlock. All of my other settings are just fine.
I use both bios's the FTW and the regular one. (for the varying options)
So I will attach both bios's . I will leave it to whomever to decide on what one is easier to modify. And last, I understand this is use at my own risk. My only other option is to do some capacitor soldering. Im not scared to do that, its just tedious work for my. I have stupid fingers. Very bad dexterity. ;(
ftp://ftp.evga.com/bios/NF78P10.bin (regular)
ftp://ftp.evga.com/bios/E178_SZ17.exe (FTW bios)
Thanks again,
Orcinus