Packard Bell Easynote TJ75 / TJ76 / TJ77 / TJ78 BIOS v1.26 - Unlocked hidden options

[Maaareee]

Ok.

I Tested it and it worked fine.

Thank you very much!

[polochon]

BIOS recovery
An interruption during a BIOS flash procedure (e.g. a power outage) can corrupt the BIOS code, which will cause the system to go into an unbootable state. You need to access and execute the boot block program to reboot the computer and recover the regular BIOS code.


Caution
Observe the following when performing a BIOS recovery:

• Make sure the battery pack is installed to the system and that the computer is connected to a UPS unit during the BIOS recovery and BIOS flash procedures.
  
• The BIOS crisis recovery disk should be prepared in a computer running the Windows XP or Windows Vista OS.
  

Packard Bell TJ75 TJ76 TJ77 TJ78 BIOS Recovery.rar
Creating the Crisis Recovery disk
To create the Crisis Recovery disk:

1. Prepare a removable USB storage device with a capacity size greater than10 MB.Note that all data on the USB storage device will be cleared during the creation of the crisis disk.
   
2. Set up a computer running the Windows XP or Windows Vista OS and plugin the USB storage device into an available USB port.
   
3. Decompress the Crisis Package Source.
   
4. Select WINCRIS.exe and then select Run as administrator.
   
5. Keep the default settings and then click Start button.
   
6. When the pop-up warning dialog box appears, click OK to create the crisis disk.
   
7. Click No if you do not want to create another crisis disk.
   
8. Eject and reconnect the USB removable storage device, and make sure it contains the BIOS.wph, MINIDOS.sys, and PHLASH16.exe files.
   

Performing a BIOS recovery
To perform a BIOS recovery:

1. Shut down the BIOS failed-computer.
   
2. Connect the USB storage device containing the Crisis Recovery disk files to the failed computer.
   
3. Press and hold the Fn+Esc keys (this is the BIOS recovery hotkey), then press the power button.The BIOS recovery process begins. When the process is complete the computer will automatically reboot.
   
4. It should boot normally now.
   

thanks man,during bios update my pc shutdown and didnt open once again,you saved my tj75 packardbell service couldnt manage to do it,they said mainboard must be change and wanted 1000 dollars,i login to site just for thanks to you
thank you very much

[ENGN55]

can I use igpu via this bios? my ati gpu is damaged and it is running now ati atombios. (after ati driver installation blue screen)

[next]

BIOS recovery
An interruption during a BIOS flash procedure (e.g. a power outage) can corrupt the BIOS code, which will cause the system to go into an unbootable state. You need to access and execute the boot block program to reboot the computer and recover the regular BIOS code.


Caution
Observe the following when performing a BIOS recovery:

• Make sure the battery pack is installed to the system and that the computer is connected to a UPS unit during the BIOS recovery and BIOS flash procedures.
  
• The BIOS crisis recovery disk should be prepared in a computer running the Windows XP or Windows Vista OS.
  

Packard Bell TJ75 TJ76 TJ77 TJ78 BIOS Recovery.rar
Creating the Crisis Recovery disk
To create the Crisis Recovery disk:

1. Prepare a removable USB storage device with a capacity size greater than10 MB.Note that all data on the USB storage device will be cleared during the creation of the crisis disk.
   
2. Set up a computer running the Windows XP or Windows Vista OS and plugin the USB storage device into an available USB port.
   
3. Decompress the Crisis Package Source.
   
4. Select WINCRIS.exe and then select Run as administrator.
   
5. Keep the default settings and then click Start button.
   
6. When the pop-up warning dialog box appears, click OK to create the crisis disk.
   
7. Click No if you do not want to create another crisis disk.
   
8. Eject and reconnect the USB removable storage device, and make sure it contains the BIOS.wph, MINIDOS.sys, and PHLASH16.exe files.
   

Performing a BIOS recovery
To perform a BIOS recovery:

1. Shut down the BIOS failed-computer.
   
2. Connect the USB storage device containing the Crisis Recovery disk files to the failed computer.
   
3. Press and hold the Fn+Esc keys (this is the BIOS recovery hotkey), then press the power button.The BIOS recovery process begins. When the process is complete the computer will automatically reboot.
   
4. It should boot normally now.
   

thanks man,during bios update my pc shutdown and didnt open once again,you saved my tj75 packardbell service couldnt manage to do it,they said mainboard must be change and wanted 1000 dollars,i login to site just for thanks to you
thank you very much

Hiii, I'm new here. I have the packard bell tj 75. I tried to flash the bios via Windows and it seemed everything was going well, but then when the flash finished the computer rebooted but it reawekened with black screen. I'd like to rewake my pc! The folder in .rar doesn't work the program, so I took the bios files from the packardbell site. I put the file renaming it in bios.wph and put in the wincris folder and created the usb key. But it didn't work (((
How long do I have to press the fn+esc key? Please answer me, i tried everything and I wouldn't want to think I have to change the motherboard