Login

***DeathBringer*** · (This post was last modified: 12-12-2015, 01:36 PM by DeathBringer.)

I look at raw data (of BIOS) by hex editor. Smile

CPUID for all CPU can be found on cpu-world.com

Xylynx · 12-13-2015, 03:58 AM

Ahh right, thanks for clearing that up and thanks for all your help

Xylynx · 12-14-2015, 02:02 PM

I'm not 100% sure if this is a valid point but could the voltage be too low to start the processor? I'm mean could the bios be trying to boot with less than 1.05 volts which is the minimum for the Q9000 but is within the voltage range for the T6600? So can this voltage be changed in the bios file or is it already part of the CPU microcode?

***DeathBringer*** · (This post was last modified: 12-14-2015, 02:27 PM by DeathBringer.)

Level of voltage isn't a problem. Problem is a number of voltage regulators. So some pins (of CPU) don't receive a power at all.

Xylynx · 12-14-2015, 02:54 PM

Ahh right okay, thank you

***DeathBringer*** · (This post was last modified: 04-08-2016, 03:03 PM by DeathBringer.)

I found the motherboard's mod for quad core CPU supporting.

Login
Username:
Password:	Lost Password?
	Remember me