12-17-2016, 03:23 AM
Hello!
My first thread so go easy on me. Read the stickies and hopefully didn't miss anything.
I have a packard bell dt85 which is the same board as the Acer 8735ZG I have found.
I have been searching for a bios with all the menus unlocked for my bios. There is some talk about a 1.07 bios mod that I haven't been able to flash. Hangs on platform signature on winphlash and "Initializing platform"
I had a pretty funny flash experience with the 1.10 mod bios for Acer 8930g which for some reason flashed correctly with /Force with phlash16.
Back on official packard bell now and been trying on my own to unlock the menus but sadly haven't succeded.
Found all the settings in the phoenix tool but couldn't save them and repack bios. Probably missing Andyp slic tool to finnish it off?
Now I'm asking you guys to help me out, or rather AHMED HOSSAM.
DT85 uses both ROM and WPH for flashing but I can't figure out how to flash both or to modify them correctly for flashing.
Do help me out :p.
Had a request before but nobody helped then, hopefully I can do better? :p
https://www.bios-mods.com/forum/Thread-P...ll-EN-DT85
Posting link and file below to org bios.. (Phoenix)
http://global-download.packardbell.com/G...0522934022&Step1=NOTEBOOK&Step2=EASYNOTE&Step3=EN%20DT85&OS=ALL&LC=en&BC=PACKARD%20BELL&SC=EMEA_27P
My first thread so go easy on me. Read the stickies and hopefully didn't miss anything.
I have a packard bell dt85 which is the same board as the Acer 8735ZG I have found.
I have been searching for a bios with all the menus unlocked for my bios. There is some talk about a 1.07 bios mod that I haven't been able to flash. Hangs on platform signature on winphlash and "Initializing platform"
I had a pretty funny flash experience with the 1.10 mod bios for Acer 8930g which for some reason flashed correctly with /Force with phlash16.
Back on official packard bell now and been trying on my own to unlock the menus but sadly haven't succeded.
Found all the settings in the phoenix tool but couldn't save them and repack bios. Probably missing Andyp slic tool to finnish it off?
Now I'm asking you guys to help me out, or rather AHMED HOSSAM.
DT85 uses both ROM and WPH for flashing but I can't figure out how to flash both or to modify them correctly for flashing.
Do help me out :p.
Had a request before but nobody helped then, hopefully I can do better? :p
https://www.bios-mods.com/forum/Thread-P...ll-EN-DT85
Posting link and file below to org bios.. (Phoenix)
http://global-download.packardbell.com/G...0522934022&Step1=NOTEBOOK&Step2=EASYNOTE&Step3=EN%20DT85&OS=ALL&LC=en&BC=PACKARD%20BELL&SC=EMEA_27P