02-08-2023, 10:20 AM
Hi there, I have an old dell e6430 latitude laptop and the board died so I managed to track down another one transferred everything and upgraded the i5 3320 to an i7 3610qm
now everything works and looks good that's when i ran into the problem i went to update the bios and found the following no F12 bios update option
using Usb dos boot method i found the following (log from it)
***BIOS flash started on 2/8/2023 at 0:01:35***
Command: D:\E6430A24.exe /s /r /f
A18 INSTALLED (Dell System Latitude E6430)
- (NO MANIFEST ON SYSTEM)
A24 UPDATE (Dell System Latitude E6430)
- System BIOS : A24
- Embedded Controller : A06
- Gigabit Ethernet : 0.D.3
- Legacy Video OROM : 2.1.3.7
- Legacy N13PESS OROM : 70.8.60.0
- Legacy N13PQSS OROM : X01
- Legacy RAID OROM : 11.0.1.1392
- Intel Management Engine Update : 8.1.72.3002
- ACPI OS support : 0.0.0.1
- Intel AntiTheft : 3.0.0.18
- Secure Boot Support : 2.3.1.C
Exit Code = 6 (Rebooting System)
***BIOS flash finished at 2/8/2023 at 0:01:48***
Exit Code = 6 (Rebooting System)
***BIOS flash finished at 2/8/2023 at 0:01:48***
Now laptop restarts but doesn't actually flash seems that because there is no manifest in the bios that it doesn't flash?
is there a way of forcing the flash? or some other work around as it's stuck on a18 and can't put anything on tried from a19 threw to a24 same thing even tried hirens usb boot and flashing from there same issue starts program, prepares it restarts but then doesn't actually do the update?
any help and or information would be great even if i can somehow extract the old dead boards bios and put that over (dunno if that would help)
now everything works and looks good that's when i ran into the problem i went to update the bios and found the following no F12 bios update option
using Usb dos boot method i found the following (log from it)
***BIOS flash started on 2/8/2023 at 0:01:35***
Command: D:\E6430A24.exe /s /r /f
A18 INSTALLED (Dell System Latitude E6430)
- (NO MANIFEST ON SYSTEM)
A24 UPDATE (Dell System Latitude E6430)
- System BIOS : A24
- Embedded Controller : A06
- Gigabit Ethernet : 0.D.3
- Legacy Video OROM : 2.1.3.7
- Legacy N13PESS OROM : 70.8.60.0
- Legacy N13PQSS OROM : X01
- Legacy RAID OROM : 11.0.1.1392
- Intel Management Engine Update : 8.1.72.3002
- ACPI OS support : 0.0.0.1
- Intel AntiTheft : 3.0.0.18
- Secure Boot Support : 2.3.1.C
Exit Code = 6 (Rebooting System)
***BIOS flash finished at 2/8/2023 at 0:01:48***
Exit Code = 6 (Rebooting System)
***BIOS flash finished at 2/8/2023 at 0:01:48***
Now laptop restarts but doesn't actually flash seems that because there is no manifest in the bios that it doesn't flash?
is there a way of forcing the flash? or some other work around as it's stuck on a18 and can't put anything on tried from a19 threw to a24 same thing even tried hirens usb boot and flashing from there same issue starts program, prepares it restarts but then doesn't actually do the update?
any help and or information would be great even if i can somehow extract the old dead boards bios and put that over (dunno if that would help)