Can not insert slic file

[amilavspm]

Hi Guys,

I have Lenovo M57e Machine. Which came with dos and i installed m57e preload win 7 professional o/s. But it's not activated. when i tried to insert slic file in to bios which is saying it' already modified with f0. but i tried it with dyanmic mode. but still it's not activated. when i check with slic toolkit it's saying that slic file cannot be found. please help me on this.

[1234s282]

Link to BIOS Please

Thanks
Admin

[amilavspm]

Link to BIOS Please

Thanks
Admin

This is the original bios file.

[TheWiz]

Are you sure you have used slmbgr manager to reactivate the OEM copy?

TheWiz

[amilavspm]

Are you sure you have used slmbgr manager to reactivate the OEM copy?

TheWiz

Which command should I use?

[1234s282]

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

[amilavspm]

While i'll try this, I just wanna point u something, That's my HP 3130 Bios's first 8 blockes are locked. I waana unlock them. Please help me on this also.

Regards,
Amilavspm

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.