HP Envy x360 flash utility

[ptek12]

Here is two files, one I edited the HP EXE, try that first.  I set to not check ROM ID, there was no command for allow same or older, only check if same and if same don't flash.
http://s000.tinyupload.com/index.php?file_id=57477306364139334574

If that exe still does not work I've also included the BIOS itself from within the EXE, you should be able to find AFUWin or AFUWinGUI that will work with it.  Actually, I will send you PM on this

Default command line was >> /P /ssid:083C6

/P is program Main BIOS Image only, so if you use one of the AFU GUI apps and it works, be sure to uncheck all the other boxes except program Main

That's impressive, thanks. I'll look into that.
If I understand correctly, you edited original flash util. with a mod to allow older? If it still won't flash then AFUWin, right?
The BIOS you included is F19, the one that killed my laptop, anything but that would be better, LOL, don't trust it anymore, something like F17/16...?
Filename is the same, only content is different.
Tell me about worst case scenario... if it starts and fails. It boots now but what if it doesn't boot anymore afterwards...? Any danger of that?