[REQUEST] Unlock BIOS for Gigabyte Aero 15x v8

[chq1029]

Thanks, I guess I'll have to keep looking on the PRR thing, it would be nice if that was always set universally the same, but it's random and sometimes can be in 1-2 modules set in various ways.   I may not be able to get it, since I was pretty sure that one would remove it.  Since it does not, don't use that file.

Thanks for the image.  No, AMIBCP supervisor is ONLY used later, after you enable the menu and settings still are missing, before that you don't touch any of it with AMIBCP.  Once I'm done I will give you my notes on this BIOS edit so you can see how it's done, the main thing controlling the menus being visible is the AMITSE Module, menus need removed or swapped in two different block lists there.  This is done by using the setup module's IFR output and then hex editing AMITSE, I'll show you tonight when I have more time.

Here is final menu unlock BIOS, test it as it is, then any still missing individual settings or submenus within any menus, then you edit with AMIBCP 5.02.0031 and set to Supervisor.

http://s000.tinyupload.com/index.php?fil...2812862883

*** This BIOS is for chq1029 ONLY, do not use if that is not your username!
Otherwise you will loose your serial, UUID, possibly LAN MAC ID and windows activations etc.   You have been warned! ***

If anyone needs unlocked BIOS, send me your programmer dump, or ask and I will make a stock BIOS edit however that can only be used if the standard method of updating BIOS on this system will allow mod BIOS to be flashed in (This is still unclear in this thread, no one has tested and let me know)

it worked ! You are a genius! All the menus are unlocked
thanks a lot!