05-31-2019, 08:19 PM
(05-29-2019, 02:44 AM)Lost_N_BIOS Wrote: You're welcome, and thank you for dropping that tip on the WSON package too.
Be advised that the MX25L12835(E) internally pulls #7 HOLD high. I replaced mine with a Winbond SOP8 and had to bridge pins #7 and #8 VCC. Also there's a MX25L12835(F) in a SOP8 package with faster reads and writes. And again I believe #7 has to bridged high.
https://www.xref-pro.com/cross-reference...5EZNI-10G/