Acer Aspire T180

[han39835]

I used the "Acer Aspire T180 With OC 1234s282"

and my options in the bios are enabled.

I have 800mhz mem cheap or not so it fully supports underclocking in order to push the Proc

I have tried setting the multiplier and it acts strangely.... 11.5 on auto and 10x on others unless i pick 11 then it uses 11 but changes to the bus do not seem to be working... even small adjustments.

I have tried setting the voltages but being as the fsb (htt bus) doesnt seem to be changing once i get into windows.

I have set FSB in bios to 233(231 and 232) to keep my Ram clocks at 800 and dropping the multiplier to 10 11 and 12 12*33 i.e. 2333 2xxx 2796 ~effective etc etc

(i have disabled cool and quiet) and I lowered the HT multiplier to keep it at around 1000mhz    
Dxdiag reports stocks CPUID report stocks.
sometimes it even reports LOWER than what autos would have produced.

However no matter what settings I use windows 7 ultimate doesnt recognize it.

in NVIDIA control panel (which I dont use cause everything is always locked anyway) it shows what I have set the BIOS to in DEVICE SETTINGS but under system information it shows stock everything

Is there a reason windows kicks me back to stock settings?

thnx

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name AMD Athlon 64 X2 4400+
Codename Brisbane
Specification AMD Athlon™ 64 X2 Dual Core Processor 4400+
Package Socket AM2 (940)
CPUID F.B.1
Extended CPUID F.6B
Brand ID 4
Core Stepping BH-G1
Technology 65 nm
Core Speed 2009.2 MHz
Multiplier x FSB 10.0 x 200.9 MHz
HT Link speed 1004.6 MHz
Stock frequency 2300 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64, AMD-V
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
Max FID 11.5x
Max VID 1.375 V
# of P-States 0

EM61SM/EM61PM (0x0000035E - 0x20210C4D) T180 acer

Performance Level
Core clock 920.0 MHz
Shader clock 1840.0 MHz
Memory clock 2224.0 MHz

CPU-Z version 1.59