(07-02-2014, 02:26 PM)DotBowder Wrote: I got the error 201 that you expected when using the bootable disk.
Every recovery attempt I tried did not work. What I did:
Format 1GB USB Flash drive with FAT.
Placed QAWGHX64.fd to the root directory of the flash drive.
After this I followed your instructions. "Fn + Esc" does nothing, the bios loads and then windows loads.
After doing a little bit more research, it appears I may need to use "Fn + R" or "Fn + B" both of these make my fan speed 100% but simply sit there.
I have tried these three combinations 3 times each. I have tried it once for each USB port on the laptop. The times when I used "R" and "B" I let the computer sit for 15 minutes each time, to make sure that I didn't mess anything up. After 15 minutes, the fan was still running at full speed. The Bios does not appear to have been changed. I am still testing different methods at the moment. Do you see anything that I'm doing wrong?
No You are doing well, but Recovery may be is disabled so only using other tool we can try !
I think You can use phlasIt.exe from USB Dos Bootable Stick so try It using Recovery Bios Mod file :
http://forums.lenovo.com/t5/Welcome-FAQs...a-p/278406
Here You find infos to use FlashIt.exe and the executable too !
Here is your folder with tool and Bios renamed for FlashIt, so copy all into USB Stick prepared and reboot to USB Dos
It will be start automaticaly !
http://rghost.net/56699207
let me know
regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use ! 
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM

[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM