[REQUEST] Lenovo G700 (7ACNxxWW) Whitelist Removal

[rough]

Look here :

http://www.ebay.com/itm/TL866CS-USB-Univ...4#shpCntId

http://www.ebay.com/itm/TL866A-USB-Unive...ltDomain_0&hash=item4ac22a482c

http://www.mcumall.com/comersus/store/Le...ategory=27

Kemod sai to me time ago :

Please be aware on device support list :

EZP2010/EZP2013 support MX25L3205D but doesn't support MX25L3206E

GQ-4X support both MX25L3205D and MX25L3206E

Minipro TL866CS support both MX25L3205D and MX25L3206E


One of the most important difference between those:

- MX25L3205D utilize WP#/ACC on pin #3. To enable erase/write programmer must give +9.5-10.5V to this pin.
- MX25L3206E utilize WP# on pin #3. To enable erase/write programmer must give VCC signal (+3.3V) to this pin.

Macronix MXIC explain this on migration document that using MX25L3205D programmer on MX25L3206E
will DAMAGE the chip (overvoltage on pin #3)
http://www.macronix.com/Lists/TechDoc/At...D_0514.pdf

For your reference on device support list:

EZP2010
http://www.c-u-s.co.uk/files/EZP2010_Dev...t_List.txt

GQ-4X
http://www.mcumall.com/comersus/store/mc...ortICs.asp

Minipro TL866 Series
http://www.autoelectric.cn/minipro/MiniP...rtList.txt

Hint: Look for 'Macronix' or 'MXIC' chips (the one that Lenovo use most)

For cost and futureproof sake, I can recommend you to use the same hardware programmer as mine
(Minipro TL866CS). It's very cheap (I get it @ USD 39) and have very large device support list database.

sorry to bother you, but I have one question :
i have TL866A and cant read or write to MX25L3205D, it said "check id error", how did you manage to program it