![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
08-23-2015, 09:26 AM
(This post was last modified: 08-25-2015, 01:47 PM by halogensarchitect.)
great stuff man , btw im breakdown , ive just accidentally lost my access credentials to my old account and cant update anything cause i dont have my old email account anymore, lols, anyhow good to see this great board still getting some love, it deserves
it for sure , and its gona be atlest a few more years till i switch over to anything other , until intel releases something rock solid and performant like x58 and 980x was back in the days, and it still is rock solid and as performant as ever, the most drawback well have will most likely be a 10-15% decrease on performance from high end gpus such as the Titan series gpus released in the next 2-3 years , due to pcie 2.0 16x instead of pcie 3.0 16x, i recon
plus posting the required drivers is an additional bonus the others didnt do , thanks alot, makes things easier
btw what are the latest recommended intel inf and intel lan drivers then
update>
ok so ive tested your new bios and its got one little issue , after the marvell bios on boot , the jmicron controller bios that has my dvd drive attached should show but instead i get the following message> no enough space to copy pci option ROM (05:00:00) , while having AHCI activated for my marvell controller and the intel controller set to RAID , so my dvd drive attached to my jmicron controller isnt being picked up on boot anymore only in windows , please fix this , thanks
it for sure , and its gona be atlest a few more years till i switch over to anything other , until intel releases something rock solid and performant like x58 and 980x was back in the days, and it still is rock solid and as performant as ever, the most drawback well have will most likely be a 10-15% decrease on performance from high end gpus such as the Titan series gpus released in the next 2-3 years , due to pcie 2.0 16x instead of pcie 3.0 16x, i recon
plus posting the required drivers is an additional bonus the others didnt do , thanks alot, makes things easier
btw what are the latest recommended intel inf and intel lan drivers then
update>
ok so ive tested your new bios and its got one little issue , after the marvell bios on boot , the jmicron controller bios that has my dvd drive attached should show but instead i get the following message> no enough space to copy pci option ROM (05:00:00) , while having AHCI activated for my marvell controller and the intel controller set to RAID , so my dvd drive attached to my jmicron controller isnt being picked up on boot anymore only in windows , please fix this , thanks
![[Valid RSS]](valid-rss.png "Validate my RSS feed")