Login

kreativ · (This post was last modified: 10-26-2017, 12:02 AM by kreativ.)

Hi

I need to activate amd-v on my acer aspire e5-553g-t6b6

bios version 1.19

can someone help me?

here is my vars.txt
https://drive.google.com/open?id=0Bx-x2I...XhxcDUzamM

ferryong · 10-26-2017, 06:42 AM

Hi,
I need to activate amd-v on my acer aspire e5-553g-15XA
bios version 1.19
can you help me?

here is my vars.txt
https://drive.google.com/drive/folders/0...sp=sharing

thenotetaker · 10-27-2017, 12:46 PM

Hey, yet another E5-553G-1986 user.
wondering if I could get the SVM enabled, 'cause like.. yea.. nearly a $700 laptop that offers a 4c processor and has virtualization disabled and it can't be enabled in the BIOS 'cause ya know.. Acer.

my vars file is attached, I might be able to do it myself but I've never worked with hex before so I'm not exactly sure how to do it.. lol

sp1k3y · (This post was last modified: 10-29-2017, 10:19 AM by sp1k3y.)

vars.txt (Size: 110.1 KB / Downloads: 4)
Hi.

Help with amd-v unlocking would be really apreciated. And if not a problem step by step guide.

Cheers

Aspire e15 e5-553g-t4kv

Insyde h20 1.19 bios

im_ryan · 11-03-2017, 02:15 AM

@sp1k3y Firstly, I take no responsibility if the instructions I give do not work for you or anyone reading this. Although, I figured out how to enable virtualization on my laptop by reading through this thread, so I will share what I did in hopes that it helps others like yourself.

For reference, my laptop specs:
Aspire E5-553G-1986
Windows 10 (Version 1703)
AMD A12-9700P Processor
8GB RAM
BIOS version 1.19

Step 1: Download this tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Step 2: Extract the tool into a new folder on your desktop. Name it BIOS.
Step 3: Open Windows start menu, type in "cmd", right click "cmd" and click on "Run as Administrator".
Step 4: In command prompt, type in "cd " and then the directory to your file on the desktop. You can find this by right clicking the folder, clicking on properties and copying the location. Go back into the command prompt and press CTRL and V at the same time on your keyboard to paste it. Then add "\BIOS" and press ENTER. For example:

Code:
cd C:\Users\Ryan\Desktop\BIOS

Step 5: Type in "H2OUVE.exe -gv vars.txt" and press ENTER.
Step 6: Open the newly created vars.txt in the BIOS folder with notepad and press CTRL and F at the same time on your keyboard and search for "Setup". It should look something like this (the numbers will probably be different - note that it may take a few searches, the file is huge):

Code:
 [031] "Setup"

      GUID: A04A27F4-DF00-4D42-B552-39511302113D

      Attributes: 0x7

      DataSize: 0x279

      Data:

            00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

            00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

             ...

Step 7: Look for the next line that begins with "000000E0:", for example:

Code:
            ...

            000000A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

            000000B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

            000000C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

            000000D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 

            000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 00 00    **This line**

            000000F0: 00 00 00 00 00 00 00 03 00 01 00 00 00 00 01 00 

            00000100: 02 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

            00000110: 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 

             ...

Step 8: On this line, change the second to last "00" to "01". For example:

Code:
           000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 00 00

                              - to -

            000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 01 00

Step 9: Save your change as a new file called "vars_mod.txt".
Step 10: In the command prompt window (refer to Step 3-4) type "H2OUVE.exe -sv vars_mod.txt".
Step 11: Restart your computer when the command prompt finishes execution (should take only a few seconds).
Step 12: Let Windows do its thing and fully shut down. For me, this took longer than it normally did, just a heads up. If your screen turns black and does not restart, then you can manually power it back up.
Step 13: Open task manager, click "more details", open the "Performance" tab and check that virtualization is enabled. If it is, you're good to go. If not, you either changed the wrong value or something went wrong. If so, then open up command prompt again as admin (Step 3-4), go to your new file and then type "H2OUVE.exe -sv vars.txt" and restart your computer again. This should revert whatever change you did.

As a side note, I saw something about this mod cutting the usable RAM in half... not really sure what they were talking about, but I did not experience this issue using the above steps.
As a second side note, it appears that if you upgrade your BIOS you will lose your virtualization setting. You will have to manually enable it again using the above method to make a new vars.txt and new vars_mod.txt.

Lastly, I made an account on this site to specifically thank mclarkke2355 and others on this thread that allowed me to force enable AMD virtualization on my laptop so I can finally use it for college. Hopefully my instruction set helps others that view this thread in the future.

ep12390 · 11-05-2017, 10:17 AM

(11-03-2017, 02:15 AM)im_ryan Wrote: @sp1k3y Firstly, I take no responsibility if the instructions I give do not work for you or anyone reading this. Although, I figured out how to enable virtualization on my laptop by reading through this thread, so I will share what I did in hopes that it helps others like yourself.

For reference, my laptop specs:
Aspire E5-553G-1986
Windows 10 (Version 1703)
AMD A12-9700P Processor
8GB RAM
BIOS version 1.19

Step 1: Download this tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Step 2: Extract the tool into a new folder on your desktop. Name it BIOS.
Step 3: Open Windows start menu, type in "cmd", right click "cmd" and click on "Run as Administrator".
Step 4: In command prompt, type in "cd " and then the directory to your file on the desktop. You can find this by right clicking the folder, clicking on properties and copying the location. Go back into the command prompt and press CTRL and V at the same time on your keyboard to paste it. Then add "\BIOS" and press ENTER. For example:

Code:
cd C:\Users\Ryan\Desktop\BIOS

Step 5: Type in "H2OUVE.exe -gv vars.txt" and press ENTER.
Step 6: Open the newly created vars.txt in the BIOS folder with notepad and press CTRL and F at the same time on your keyboard and search for "Setup". It should look something like this (the numbers will probably be different - note that it may take a few searches, the file is huge):

Code:
[031] "Setup" GUID: A04A27F4-DF00-4D42-B552-39511302113D Attributes: 0x7 DataSize: 0x279 Data: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...

Step 7: Look for the next line that begins with "000000E0:", for example:

Code:
... 000000A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 00 00 **This line** 000000F0: 00 00 00 00 00 00 00 03 00 01 00 00 00 00 01 00 00000100: 02 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000110: 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 ...

Step 8: On this line, change the second to last "00" to "01". For example:

Code:
000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 00 00 - to - 000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 01 00

Step 9: Save your change as a new file called "vars_mod.txt".
Step 10: In the command prompt window (refer to Step 3-4) type "H2OUVE.exe -sv vars_mod.txt".
Step 11: Restart your computer when the command prompt finishes execution (should take only a few seconds).
Step 12: Let Windows do its thing and fully shut down. For me, this took longer than it normally did, just a heads up. If your screen turns black and does not restart, then you can manually power it back up.
Step 13: Open task manager, click "more details", open the "Performance" tab and check that virtualization is enabled. If it is, you're good to go. If not, you either changed the wrong value or something went wrong. If so, then open up command prompt again as admin (Step 3-4), go to your new file and then type "H2OUVE.exe -sv vars.txt" and restart your computer again. This should revert whatever change you did.

As a side note, I saw something about this mod cutting the usable RAM in half... not really sure what they were talking about, but I did not experience this issue using the above steps.
As a second side note, it appears that if you upgrade your BIOS you will lose your virtualization setting. You will have to manually enable it again using the above method to make a new vars.txt and new vars_mod.txt.

Lastly, I made an account on this site to specifically thank mclarkke2355 and others on this thread that allowed me to force enable AMD virtualization on my laptop so I can finally use it for college. Hopefully my instruction set helps others that view this thread in the future.

Is it possible this could brick my machine at all? I have a E5-553G-F8EF on BIOS 1.19. This machine has 16gb ram so possibly somehow running this mod will set the ram to 8gb?

Thank you for taking the time to write out the instructions by the way.

Attached is my vars.txt if anyone would please like to take a go at this.

im_ryan · (This post was last modified: 11-08-2017, 09:01 PM by im_ryan.)

(11-05-2017, 10:17 AM)ep12390 Wrote: Is it possible this could brick my machine at all? I have a E5-553G-F8EF on BIOS 1.19. This machine has 16gb ram so possibly somehow running this mod will set the ram to 8gb?

Thank you for taking the time to write out the instructions by the way.

Attached is my vars.txt if anyone would please like to take a go at this.

I have no idea and will not pretend to. I'm sure there is a chance, but the risk is up to you. I would suggest looking up the vars.txt files others have posted and compare them to the posted vars_mod.txt files that you can find in the thread. You may even get lucky and find one from your laptop version that is already modified (if you do DO NOT DIRECTLY COPY IT -- I can tell you that much). Just run the two files through diffchecker.com and see what value was edited. You can do this for all the vars.txt/vars_mod.txt files you can find. That's what I did and I came up with the value that I show how to edit in my above tutorial.

Do not take my word for it. Do your own research. This is your laptop, not mine. Only make changes you are 100% comfortable with.
If I'm being honest, when I made the change on my laptop I was extremely nervous...but it worked for me and I saw that no one is posting vars_mod.txt files anymore, so I hoped that my tutorial, at the very least, would point everyone in the right direction.

As for the ram issue, I'm not sure since mine is 8gb. You'll have to research that or find out the hard way. It's up to you. Hopefully someone more knowledgeable comes along and gives you better advice than I am.

Good luck, and if you try it let me know if it works.

kreativ · 11-09-2017, 04:15 PM

(11-03-2017, 02:15 AM)im_ryan Wrote: @sp1k3y Firstly, I take no responsibility if the instructions I give do not work for you or anyone reading this. Although, I figured out how to enable virtualization on my laptop by reading through this thread, so I will share what I did in hopes that it helps others like yourself.

For reference, my laptop specs:
Aspire E5-553G-1986
Windows 10 (Version 1703)
AMD A12-9700P Processor
8GB RAM
BIOS version 1.19

Step 1: Download this tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Step 2: Extract the tool into a new folder on your desktop. Name it BIOS.
Step 3: Open Windows start menu, type in "cmd", right click "cmd" and click on "Run as Administrator".
Step 4: In command prompt, type in "cd " and then the directory to your file on the desktop. You can find this by right clicking the folder, clicking on properties and copying the location. Go back into the command prompt and press CTRL and V at the same time on your keyboard to paste it. Then add "\BIOS" and press ENTER. For example:

Code:
cd C:\Users\Ryan\Desktop\BIOS

Step 5: Type in "H2OUVE.exe -gv vars.txt" and press ENTER.
Step 6: Open the newly created vars.txt in the BIOS folder with notepad and press CTRL and F at the same time on your keyboard and search for "Setup". It should look something like this (the numbers will probably be different - note that it may take a few searches, the file is huge):

Code:
[031] "Setup" GUID: A04A27F4-DF00-4D42-B552-39511302113D Attributes: 0x7 DataSize: 0x279 Data: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...

Step 7: Look for the next line that begins with "000000E0:", for example:

Code:
... 000000A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 00 00 **This line** 000000F0: 00 00 00 00 00 00 00 03 00 01 00 00 00 00 01 00 00000100: 02 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000110: 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 ...

Step 8: On this line, change the second to last "00" to "01". For example:

Code:
000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 00 00 - to - 000000E0: 00 00 00 02 00 00 00 00 00 00 00 01 01 00 01 00

Step 9: Save your change as a new file called "vars_mod.txt".
Step 10: In the command prompt window (refer to Step 3-4) type "H2OUVE.exe -sv vars_mod.txt".
Step 11: Restart your computer when the command prompt finishes execution (should take only a few seconds).
Step 12: Let Windows do its thing and fully shut down. For me, this took longer than it normally did, just a heads up. If your screen turns black and does not restart, then you can manually power it back up.
Step 13: Open task manager, click "more details", open the "Performance" tab and check that virtualization is enabled. If it is, you're good to go. If not, you either changed the wrong value or something went wrong. If so, then open up command prompt again as admin (Step 3-4), go to your new file and then type "H2OUVE.exe -sv vars.txt" and restart your computer again. This should revert whatever change you did.

As a side note, I saw something about this mod cutting the usable RAM in half... not really sure what they were talking about, but I did not experience this issue using the above steps.
As a second side note, it appears that if you upgrade your BIOS you will lose your virtualization setting. You will have to manually enable it again using the above method to make a new vars.txt and new vars_mod.txt.

Lastly, I made an account on this site to specifically thank mclarkke2355 and others on this thread that allowed me to force enable AMD virtualization on my laptop so I can finally use it for college. Hopefully my instruction set helps others that view this thread in the future.

I can confirm this method works with Acer Aspire E5-553G-T686
Thanks a lot for the guide now I can use amd-v again

FerchogtX · 11-09-2017, 06:10 PM

Weird question, in fact, I did compare the files, and I found there is also a change in the 00000140 range, according to McCkarke's help:

Original:

Code:
00000140: 00 00 01 00 00 01 00 00 00 00 00 00 00 01 00 02

Changed:

Code:
00000140: 00 00 01 00 00 01 00 00 00 00 00 00 00 00 00 02

There is a 01 changed into a 00... can you confirm if this is needed to enable Virtualization or not? Or at least, what does this value do?

Thanks in advance.

Cya!

suhaspr · 11-09-2017, 10:22 PM

Hello Sir,

I have an acer aspire E5-553g-T9VU Amd A10-9600p Laptop.
Currently, I am on bios version 1.05 ( Insyde version ).
Bios Insyde Acer E5-553G link -->

https://global-download.acer.com/GDFiles...R&SC=AAP_4

From extensive searching on this forum, I came to know i need to download H2OVE Tool. I have downloaded it and
generated vars.txt from it which is present in attachment below.

I will be forever grateful to you if you can help me enable virtualization in my firmware.

Regards,
Suhas P R

Login
Username:
Password:	Lost Password?
	Remember me