05-02-2015, 11:13 AM
(This post was last modified: 05-02-2015, 02:59 PM by LotF.
Edit Reason: edit
)
okay, I got the hardware. Now I would follow the instructions of the thread you posted. First getting a full dump of the current bios and then using your modded one for flashing, right?
EDIT: Alright, obviously not the way to go, since it does not even boot with the modded bios. I uploaded you the extraced bios from the chip as *.bin and *.hex, hope that does help somehow?!
http://www.sendspace.com/filegroup/N40Nz...eLyKuDxiQA
Oh and before I forget for all the people out there:
The EEPROM chip is under the black cover close to the CPU. When you take out the SODIMM and pull back the cover ledge towards the CPU, you cannot miss it!
Best regards!
EDIT: Alright, obviously not the way to go, since it does not even boot with the modded bios. I uploaded you the extraced bios from the chip as *.bin and *.hex, hope that does help somehow?!
http://www.sendspace.com/filegroup/N40Nz...eLyKuDxiQA
Oh and before I forget for all the people out there:
The EEPROM chip is under the black cover close to the CPU. When you take out the SODIMM and pull back the cover ledge towards the CPU, you cannot miss it!
Best regards!