|
Welcome
|
You have to register before you can post on our site.
|
|
|
Hp ECS MCP61PM-HM (Nettle2)
|
Posts: 2,300
Threads: 62
Joined: Jul 2009
Reputation:
63
After pressing F1 or before? Im assuming its unbootable. Please tell me if you have a backup bios chip or not. Do you hear any disk activity? Im thinking either you had a bad flash or something went terribly wrong, but the bios looked good in all of my tools. If you are able to recover I can think of one more thing to try that may make it work.
TheWiz
Posts: 13
Threads: 2
Joined: Jul 2009
Reputation:
0
it is after pressing F1,
it is booting fine, just not able to get into the Bios Setup....
(08-02-2009, 11:08 AM)TheWiz Wrote: After pressing F1 or before? Im assuming its unbootable. Please tell me if you have a backup bios chip or not. Do you hear any disk activity? Im thinking either you had a bad flash or something went terribly wrong, but the bios looked good in all of my tools. If you are able to recover I can think of one more thing to try that may make it work.
TheWiz
Posts: 2,300
Threads: 62
Joined: Jul 2009
Reputation:
63
08-02-2009, 04:42 PM
(This post was last modified: 08-02-2009, 04:58 PM by TheWiz.)
Well thats good news. Okay. Ive readded the setting trying a different method, hopefully it will fix whatever is holding you up at the bios screen. Also you said after pressing F1, for my computer(I have this board also) its F10. You have an HP right?
In any event here's the link, the fan setting and all included Overclocked settings are under Power.
http://files.getdropbox.com/u/1525839/Bi...FANMOD.bin
Remember to flash in DOS with awdflash.
Good Luck!
TheWiz
Posts: 13
Threads: 2
Joined: Jul 2009
Reputation:
0
you press F10? that quite strange,
it should be F1, not F10...
anyway, I tried to flash the bios, but still not work.. still black screen after press 'F1'
(08-02-2009, 04:42 PM)TheWiz Wrote: Well thats good news. Okay. Ive readded the setting trying a different method, hopefully it will fix whatever is holding you up at the bios screen. Also you said after pressing F1, for my computer(I have this board also) its F10. You have an HP right?
In any event here's the link, the fan setting and all included Overclocked settings are under Power.
http://files.getdropbox.com/u/1525839/Bi...FANMOD.bin
Remember to flash in DOS with awdflash.
Good Luck!
TheWiz
Posts: 2,300
Threads: 62
Joined: Jul 2009
Reputation:
63
Okay, just so we can confirm its the bios, try flashing just the unlocked overclocked version that has been reported to work successfully.
Posts: 13
Threads: 2
Joined: Jul 2009
Reputation:
0
for the unlocked overclocked version, it is working fine, it is able to get into the bios setup...
(08-03-2009, 08:36 AM)TheWiz Wrote: Okay, just so we can confirm its the bios, try flashing just the unlocked overclocked version that has been reported to work successfully.
Posts: 2,300
Threads: 62
Joined: Jul 2009
Reputation:
63
08-03-2009, 05:47 PM
(This post was last modified: 08-03-2009, 06:16 PM by TheWiz.)
Well it looks like the problem is probably that particular setting is mapped, but still hidden. Probably in order to get it right we may have to flash 1 or 2 more times with different places inside the bios.
I have been studying this and I have learned by experience that this setting doesn't like to be moved around too much because its not enclosed in its menu properties, which could be whats messing us up is the menus fighting each other. Im hoping that this bios will do it, but only testing will verify. I put the setting under the boot tab, which may sound like a wierd place but I think it may do the trick.
Here's the Link: http://files.getdropbox.com/u/1525839/Bi...FANMOD.bin
Thanks for your Patience,
TheWiz
Posts: 13
Threads: 2
Joined: Jul 2009
Reputation:
0
sorry for late reply,
I tried this bios, but it does not work at all, it failed to boot up, it display nothing after press 'power on' switch..
(08-03-2009, 05:47 PM)TheWiz Wrote: Well it looks like the problem is probably that particular setting is mapped, but still hidden. Probably in order to get it right we may have to flash 1 or 2 more times with different places inside the bios.
I have been studying this and I have learned by experience that this setting doesn't like to be moved around too much because its not enclosed in its menu properties, which could be whats messing us up is the menus fighting each other. Im hoping that this bios will do it, but only testing will verify. I put the setting under the boot tab, which may sound like a wierd place but I think it may do the trick.
Here's the Link: http://files.getdropbox.com/u/1525839/Bi...FANMOD.bin
Thanks for your Patience,
TheWiz
Posts: 2,300
Threads: 62
Joined: Jul 2009
Reputation:
63
Man, your computer just doesn't like the FAN mod at all. Try using the recovery method described in the tutorial section and see if you can get back in.
TheWiz
I wonder if the key ot enter your bios being different has anything to do with it.
Posts: 13
Threads: 2
Joined: Jul 2009
Reputation:
0
I have used the bios swap method to recover the bios
it look like impossible to disable the CPU fans checking on boot up
|
Users browsing this thread: 1 Guest(s)
|
![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
![[Valid RSS]](valid-rss.png "Validate my RSS feed")