Login

kokos76 · 12-21-2019, 05:19 PM

A bootable flash drive was created by the latest version of Rufus. BIOS 1.60 was flashed with it without problems.

***DeathBringer*** · 12-21-2019, 05:20 PM

Do command dir and make a photo again.

kokos76 · (This post was last modified: 12-21-2019, 05:29 PM by DeathBringer.)

[Image: 23e15e9b28348f76c7dc0402c40d4dfd.th.jpg]

***DeathBringer*** · (This post was last modified: 12-21-2019, 05:27 PM by DeathBringer.)

You didn't read README.txt in sp51245.exe, did you?
You need to copy patch.opt and my U7F_0115.BIN !

kokos76 · 12-21-2019, 05:39 PM

Sorry, I'm to blame! I forgot that I had to follow the instructions from sp51245.exe and used sp73863.exe (this is for updating the BIOS).

[Image: ea5227d68dac3415f74d8d035085e4cc.th.jpg]

kokos76 · (This post was last modified: 12-21-2019, 05:46 PM by kokos76.)

Now I have to restart the computer, go into the BIOS and reset to factory settings?
And then insert X3363 and try to boot?

kokos76 · (This post was last modified: 12-22-2019, 02:39 AM by kokos76.)

I Reset BIOS to factory settings. Rebooted and turned off the computer. Installed X3363 - no luck with the new microcodes ... Everything is the same as with the old ones.
P.S. I turned on the POST display in advance - the memory check does not even begin. There is no screen output at all.

***DeathBringer*** · 12-22-2019, 03:12 AM

Make new screenshot of regedit with your Pentium E5300.
And make new BIOS dump.

kokos76 · (This post was last modified: 12-22-2019, 06:13 AM by DeathBringer.)

BIOS #2 https://drive.google.com/file/d/1-JgNiqf...sp=sharing
regedit #2

[Image: 9f6f80fbfa24217b1027b24b39e04638.th.jpg]

***DeathBringer*** · (This post was last modified: 12-22-2019, 06:15 AM by DeathBringer.)

Universal microcode (for C2D & Xeon) was successfully injected into BIOS.
As I thought it's not microcode problem.
Have you POST-card and hardware programmer?
Did you test your Xeon with other motherboard?

Login
Username:
Password:	Lost Password?
	Remember me