06-26-2020, 02:51 AM
Thank you very much for sharing this information. It worked perfectly. I followed precisely your How-To and found numerous additional options in the Bios/UEFI, though some are rather mysterious without further documentation or explanation and better remain untouched.
Only with your help it was possible to install Windows 10 x64 in the state of the art UEFI mode. This is a great example how people can support each other and therefore are able to use ‚outdated‘ hardware, which is not active (new software, using open source like core boot) or passive (documentation for beginner, advanced user & developer) supported by the manufacturer anymore. In my opinion it is a pity, that there are already integrated features in the BIOS/UEFI, but they are hidden on purpose by the manufacturer and therefore artificially limiting the usability of the device.
I didn’t try an upgrade of the ‘older’ device to the BIOS version of the newer device. I read an article, that this would cause troubles and a downgrade is not easy.
I used your how to on following devices to enable UEFI boot ability and deactivating ‘secure boot’. More specs in the attached screenshots. (It seems strange to me, that there different features [BIOS, operating system] on the devices but there is no difference in the label or model number of the device)
MSI GE60 0NC (label on back side: Model No MS-16 GA)
shipped with Windows 8
BIOS/UEFI Version E16GAIMS.514
MSI GE60 0NC (label on back side: Model No MS-16 GA)
shipped with Windows 7
BIOS/UEFI Version E16GAIMS.10F
Only with your help it was possible to install Windows 10 x64 in the state of the art UEFI mode. This is a great example how people can support each other and therefore are able to use ‚outdated‘ hardware, which is not active (new software, using open source like core boot) or passive (documentation for beginner, advanced user & developer) supported by the manufacturer anymore. In my opinion it is a pity, that there are already integrated features in the BIOS/UEFI, but they are hidden on purpose by the manufacturer and therefore artificially limiting the usability of the device.
I didn’t try an upgrade of the ‘older’ device to the BIOS version of the newer device. I read an article, that this would cause troubles and a downgrade is not easy.
I used your how to on following devices to enable UEFI boot ability and deactivating ‘secure boot’. More specs in the attached screenshots. (It seems strange to me, that there different features [BIOS, operating system] on the devices but there is no difference in the label or model number of the device)
MSI GE60 0NC (label on back side: Model No MS-16 GA)
shipped with Windows 8
BIOS/UEFI Version E16GAIMS.514
MSI GE60 0NC (label on back side: Model No MS-16 GA)
shipped with Windows 7
BIOS/UEFI Version E16GAIMS.10F