CLEVO BIOS Mods

[Prema]

Holy moly, never saw anyone with BIOS 01...you may have to update to an earlier BIOS & EC first...could you make a dump of that BIOS please:

http://www.mediafire.com/?37q68r661vw6lw1

Use basic settings and hit save!

[Sin Harvest]

Yup I hope you don't mind waiting until tomorrow.
It's quite late on my side of the world.
Thanks for your help so far

[Sin Harvest]

So I've attached the v01 BIOS

  biosv01.zip (Size: 1.29 MB / Downloads: 48)

[Prema]

OK it looks like you have EC version 05 is that correct?

If so update to BIOS 02 first:

http://www.mediafire.com/?8mp1hwwbgvpvz04

After that do the update that I sent you earlier.

[Sin Harvest]

OK it looks like you have EC version 05 is that correct?

If so update to BIOS 02 first:

http://www.mediafire.com/?8mp1hwwbgvpvz04

After that do the update that I sent you earlier.

Yep it's EC v05 from memory. Thank you for all your help!

[lugier]

hello,

I downloaded the bios for my laptop clevo p170HMx serial NKP170HM0001F00310. all went great it flashed correctly but after it finished, i restarted the laptop and there is no sign of life. all black the only light is the power + orange one for Bluetooth, keyboard not respond, black screen as far and self turn off. as i understand the bios flashing was failed please any idea how to fix it ?

I dont know if i brick the bios or the ec firmware or two

big thanks by advance!

[Prema]

What was the bios and ec version before the update and what did you update it to?

[mmodem]

3D+XTU = "working"







STATUS UPDATE:

Milestones:

DONE - Intel XTU support enabled
DONE - XTU 2920/2960 Extreme CPUs multi & additional Turbo voltage unlocked
DONE - XTU XMP profile support (partial, see bug list)
DONE - MXM modules updated to support GTX485M & GTX580M with NVIDIA 3D VISION (usually blocked on unlicensed bios)
DONE - CPU microcode updated to - v25 (2011/10/11)
DONE - SATA RAID bios updated to - v11.1.0.1413 (RAID TRIM SUPPORT, yet to be tested)
DONE - TDP & Turbo Time Limits customized (hard code)
DONE - T1 command rate for 4 SO-DIMMs enabled (hard code)
DONE - Customized Boot Logos

NEW: - ME Firmware updated to 7.1.30.1142 (Clevo left us at 7.0.4.1197)


Known BUGs:

- when using 4 DIMMS XMP profile is limited to a maximum of 1600mhz. (up to 3 DIMMS run up to 2133mhz)
(workaround: special JDEC only version to support 4 DIMMS @ 1866mhz)


If you want this bios to be released please let me know by posting a reply.
Otherwise I can save myself some time!




STOCK BIOS:

Lates stock P170HM3 Clevo Bios:

http://www.mediafire.com/file/8lzvuzawzc...IOS105.zip

Latest stock P170HMx Clevo EC:

http://www.mediafire.com/file/719d329dp6..._EC_09.zip

AMI APTIO TOOLS:

AMIBCP 4.53 & MMTOOL 4.50.0.23 (THX@qtm):

http://www.sendspace.com/file/owfsdf

VISUAL eBIOS 5.68.0087 (THX@Borg Number One):

http://www.mediafire.com/?7p397vbtdk0ze2z

AMISCE for DOS 2.01.0028 (THX@quid):

http://www.mediafire.com/?l9yv198ashs0kia

PLease clarify me if this can be used for W150HRM (which haves i5 cpu), or if i need another tool and which one if you dont mind telling us?

By the way, great work

---

PLease clarify me if this can be used for W150HRM (which haves i5 cpu), or if i need another tool and which one if you dont mind telling us?

By the way, great work

[Prema]

The BIOS & EC are not for your model, but the tools can be used, yes.

[moral hazard]

If you want this bios to be released please let me know by posting a reply.
Otherwise I can save myself some time!

@Prema, would that bios work for a non-3d notebook?

I flashed a P170HM bios and EC onto my NP8150 and it works, I want to know if your bios will work because it's very impressive.
I would love to have that bios!

Link to details of my flash:
http://forum.notebookreview.com/sager-cl...ost8838897