Slic 2.1 Request for Compaq CQ61-115ES

[smelero]

Hi Bios-Mods Team,

Please could help to me for change from SLIC 2.0 to SLIC 2.1 on Compaq CQ61-115ES with Insyde BIOS system.

- Manufacturer: Compaq
- Model: CQ61-115ES
- Bios Revision: F23 Rev.3.5
- Bios Type: Insyde H2O
- Original Bios Compaq Link version F23: http://ftp.hp.com/pub/softpaq/sp51501-52000/sp51527.exe
- RW Report: https://drive.google.com/file/d/0B6diI0u...sp=sharing

Thanks and advance for all possible helps,  

Regards,

[BDMaster]

Hi mate,
For Slic 2.1 You can use the HP DMI Toolkit or HP DMI SLP :

http://forums.mydigitallife.info/threads...s?p=131386&viewfull=1#post131386

It has Slic 2.1 internal and You have just to unlock !
So use HP NBDMIFIT and then use these tools and I will provide a full unlocked Bios . . .
Use this tool run It as Admin and upload here the result file :

https://www.sendspace.com/file/64otcs or http://rghost.net/65CWxR87y

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

[smelero]

Hi mate,
For Slic 2.1 You can use the HP DMI Toolkit or HP DMI SLP :

http://forums.mydigitallife.info/threads...s?p=131386&viewfull=1#post131386

It has Slic 2.1 internal and You have just to unlock !
So use HP NBDMIFIT and then use these tools and I will provide a full unlocked Bios . . .
Use this tool run It as Admin and upload here the result file :

https://www.sendspace.com/file/64otcs or http://rghost.net/65CWxR87y

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

Hi BDMaster,

First of all, thanks for your prompt replay and help.

I used HP DMI Tool Kit and change in SKU on advanced menu Shipped fm Vista to Win7, but re-star, the aida software mentioned only SLIC 2.0 and not SLIC 2.1.

Thanks for your help and possible developments

[BDMaster]

Which version You used as there are many !

[smelero]

Hi,

Used NbDmiFit-2.08.zip = Eprom Utility v2.08 - 2014
                                      HPBQ193


I just changed the SKU in advanced settings (fm Vista to non Windows and non Windows to Windows 7).
I have to change something extra point, for example Platform revision (actual 1.0, additionals: 1.0a, 1.1, 1,1b, 2,0, 3.0) or others points

Thanks and advance friend

Regards,

[BDMaster]

Let me see the PCID You used !

Then use this one :

http://forums.mydigitallife.info/threads/7033-Insyde-bios-mod-requests/page620?p=408322&viewfull=1#post408322

HPBQ138_patched

http://rghost.net/795X4kpBw

OS SKU: [0]
OS SKU: [1]
OS SKU: [2]

Selection:

 [0] System is shipped with Non-Windows Vista OS
[1] System is shipped with Windows Vista OS
[2] System is shipped with Windows 7 OS
Set System OS SKU configuration:[0-2]

Let me know
regards

[smelero]

Hi friend,

According to Aida software, upon change sku in advance menu (fm Vista -1 to W7 -2), I check again under always running Windows Vista system, but remain the same slic 2.0

One question, its necessary then reinstall the windows (W7) to be effective SLIC 2.1 ?

Thansk for your help

[BDMaster]

No You have to use this Tool :

http://forums.mydigitallife.info/threads...rt-Backup)

Use to check Slic version etc.
Let me know
Regards

Use this tool run It as Admin and upload here the result file :

https://www.sendspace.com/file/64otcs or http://rghost.net/65CWxR87y

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

Regards

[smelero]

Hi DBMaster,

First of all, sorry for all disturbs ....  

Attached picture of SLIC Tool Kit as per request (again the same situation with slic 2.0) upon sku changed with HPBQ138

[attachment=9553]

Backup Tools file: https://drive.google.com/file/d/0B6diI0u...sp=sharing

Thanks for your help and instructions

[BDMaster]

Ok mate,
Try this one SLIC + NWL + ADV :

http://rghost.net/6s4vxqgdd

If this will not work I will make some modify yet !
let me know
Regards

P.S. Use Slic Toolkit and let me know