[REQUEST] HP 2560p advanced menu

[BDMaster]

These words can give me the possibility to go forward and I can say only THANKS my friend for
Your support !!!
Regards

[BDMaster]

Ok last Update for dimostrate that Oleh is a liar and thief and copier :


**********************************************************************************************************************************************************************************
RAM Speed Unlock (Speedo) This trick Unlock RAM Memory Speed
**********************************************************************************************************************************************************************************

This Mod is reported initialy by CodeRusn and then bt XfD, and BDMaster (publicated 02-28-2015, 10:14 AM) :
https://www.bios-mods.com/forum/Thread-L...ble?page=3

So Who say the true ? BDMaster , I think and these ere the body of evidence !

Memory Frequency Unlock (CodeRush, Xfd, BDMaster) :

54519AE4-C284-42A8-901C-AF2132999E32_16.ROM SandyBridgePhx.efi

1810 : 8B85C8FCFFFF8B480966C741013505C685C2FCFFFF0C to 660F1F4400000F1F00660F1F4400000F1F800000


54519AE4-C284-42A8-901C-AF2132999E32_16.ROM SandyBridgePhx.efi = RAM Speed (check for 0x535h (decimal 1333) Mhz Frequencies)

181E : 8B 95 C8 FC FF FF to 66 0F 1F 44 00 00 mov eax, [ebp+var_338] to nop word ptr [eax+eax+00h]

1824 : 8B 42 09 to 0F 1F 00 mov eax, [ebp+var_338] to nop dword ptr [eax]

1827 : 66 C7 41 01 35 05 to 66 0F 1F 44 00 00 mov word ptr [ecx+1], 535h to nop word ptr [eax+eax+00h]

182D : C6 85 C2 FC FF FF 0C to 0F 1F 80 00 00 00 00 mov [ebp+var_33E], 0Ch to nop dword ptr [eax+00000000h]

(O:1810:660F1F440000)
(O:1816:0F1F00)
(O:1819:660F1F440000
(O:181F:0F1F8000000000)

Original

.text:FFD3A8A2 mov edx, [ebp+var_338]
.text:FFD3A8A8 mov eax, [edx+9]
.text:FFD3A8AB mov word ptr [eax+1], 535h
.text:FFD3A8B1 mov [ebp+var_33E], 0Ch

Modified

.text:FFD3A8A2 nop word ptr [eax+eax+00h]
.text:FFD3A8A8 nop dword ptr [eax]
.text:FFD3A8AB nop word ptr [eax+eax+00h]
.text:FFD3A8B1 nop dword ptr [eax+00000000h]

So just noped these instructions We will get the Frequencies Unlock !

Look well the post :

This Mod is reported initialy by CodeRusn and then bt XfD, and BDMaster (publicated 02-28-2015, 10:14 AM) :
https://www.bios-mods.com/forum/Thread-L...ble?page=3

At that date OLEH was none inexsistent so HE COPIED AGAIN and AGAIN and AGAIN !!!
Regards

It's only a Memory Speed unlocking Trick !

https://forums.lenovo.com/t5/X-Series-Th...d-p/834329

From Bios v.1.29 above Lenovo locked RAM Speed so to get again higher speed was copied a Module Code chunck
to unlock as before RAM Speed !
No RSA Key replaced (there isn't any public RSA Key Lenovo or Others) and to reflash Bios Mod is used a
Winflash version Patched (DLL cracked = environment.dll) by Serg008 !

Memory Frequency Unlock (Xfd) :

54519AE4-C284-42A8-901C-AF2132999E32_16.ROM SandyBridgePhx.efi

1810 : 8B85C8FCFFFF8B480966C741013505C685C2FCFFFF0C to 660F1F4400000F1F00660F1F4400000F1F8000000000

That's all Mod !

[BDMaster]

Now I am tired as I sopported You and your life ways but It's enough . . .

https://www.bios-mods.com/forum/Thread-L...ble?page=3

To some. . . O . . . ne next time when You wrote about RAM Speedo be careful as the Post
is been done much time ago and I made many reply about It,  there so I will dimostrate that
You copied AGAIN AGAIN and AGAIN without say thanks to . . . me !
Regards

[fabricator]

Thanks for showing me the page with all HP BIOS upgrades to this machine. I checked the changelogs, and noticed that SATA3 support is enabled back from version F.28. Also, there are various improvements and bugfixes in the later versions.

I was wondering that since later versions then f.21 are RSA protected, is it possible to mod the latest (F.60) , or only the version F.21, and below?

It would be better to start with the most possible recent one what can be modded because of all the fixes...

The interesting is that when this machine got to me it had F.27, i checked. Then i reverted back to F.21 without problems! I wanted now to update to F.60, because it has SATA3 support, and maybe RAID0 is working but here is the interesting issue now: The official updater does not enable to ubdate because of the model mismatch that you've pointed out! It says exactly that my system is 68SSU and the update is for 68SOU! I've tried numerous versions from F.22, but no one will update my system BC of the mismatch. Very interesting, because i had f.27 wich is 68SOU, and when i reverted, the model mismatch did not caused a problem.

Anyway, in a few days i will obtain an SPI PGM, dump the whole chip for backup, and can try to experiment.

[BDMaster]

No Wait
Updating will lock any possibility to test Bios Mod !

[fabricator]

No Wait
Updating will lock any possibility to test Bios Mod !

OK!

[BDMaster]

We will try to downgrade using Recovery Procedure !
You know how to . . . as You downgraded to F.21 ?
Let me know
Regards

[fabricator]

We will try to downgrade using Recovery Procedure !
You know how to . . . as You downgraded to F.21 ?
Let me know
Regards

Currently i have F.21, but i can not downgrade or upgrade anywhere from here with official tools

[BDMaster]

Yes We have to try the Recovery Procedure !

Read this TTAV134 desribed how to :

http://forums.mydigitallife.info/threads...post338339

TTAV134 (HP HPQFlash EFI BIOS disaster recovery)

If your laptop is bricked after flashing a bios, do the following:
Format an USB flash drive with an FAT partition, and create this folder structure :

USB_Name:\Hewlett-Packard\BIOS\Current

!!!! case sensitive !!!!

Download your HPQFlash bios package from HP.
Extract the content of .exe file and then, extract Rom.cab.
The Rom.cab file should content:

efibios.sig
Rom.bin
Rom.sig
ver.sig
ver.txt

Open ver.txt and note the name 68xxx on the first line
Rename Rom.bin with the name of the bios (eg: 68SOU.BIN for a hp2560p)
Rename efibios.sig with the name of the bios (eg: 68SOU.SIG for a hp2560p)

copy 68xxx.BIN and 68xxx.SIG to the "Current" folder of USB flash drive.

Recovery Procedure :

In order to initiate the BIOS recovery, "Window Key + B" must be pressed during powering on the system.
BIOS recovery can be manually forced by pressing and holding the 4 arrow keys and pressing the power button.
You can also read this HP tech note:

BIOS Recovery Process Will Not Restore BIOS on Custom Images If EFI Partition is Deleted

regards


I will prepare the Recovery files . . .

http://rghost.net/64RSRH7cY

Let me know
Regards

[fabricator]

Yes We have to try the Recovery Procedure !

Read this TTAV134 desribed how to :

http://forums.mydigitallife.info/threads...post338339

TTAV134 (HP HPQFlash EFI BIOS disaster recovery)

If your laptop is bricked after flashing a bios, do the following:
Format an USB flash drive with an FAT partition, and create this folder structure :

USB_Name:\Hewlett-Packard\BIOS\Current

!!!! case sensitive !!!!

Download your HPQFlash bios package from HP.
Extract the content of .exe file and then, extract Rom.cab.
The Rom.cab file should content:

efibios.sig
Rom.bin
Rom.sig
ver.sig
ver.txt

Open ver.txt and note the name 68xxx on the first line
Rename Rom.bin with the name of the bios (eg: 68SOU.BIN for a hp2560p)
Rename efibios.sig with the name of the bios (eg: 68SOU.SIG for a hp2560p)

copy 68xxx.BIN and 68xxx.SIG to the "Current" folder of USB flash drive.

Recovery Procedure :

In order to initiate the BIOS recovery, "Window Key + B" must be pressed during powering on the system.
BIOS recovery can be manually forced by pressing and holding the 4 arrow keys and pressing the power button.
You can also read this HP tech note:

BIOS Recovery Process Will Not Restore BIOS on Custom Images If EFI Partition is Deleted

regards


I will prepare the Recovery files . . .

http://rghost.net/64RSRH7cY

Let me know
Regards

Thanks! But i do not understand correctly, why do i need to recover now?
The F.21 is working what is on it right now. The official F.01 would be good to downgrade, because it has higher ram speeds!