[REQUEST] Lenovo G40-45 Bios Unlock Advance Options

[Mr.VanHelsing]

Hello Sir, i wanna enable hardware virtualzation but there is no on my bios. i had check it with securable and my laptop was supported hardware virtualization. sorry i had to try post the result of back up my bios but when i back up these error.
this is my product uses
Lenovo G40-45
BIOS : A2CN38WW (V2.06)
InsydeH20

bios file http://support.lenovo.com/us/en/downloads/DS100823

please master help me , Thanks Before

[BDMaster]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF http://tiny.cc/rwy24x

http://rghost.net/53128665 http://tiny.cc/bxy24x

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

[Mr.VanHelsing]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF http://tiny.cc/rwy24x

http://rghost.net/53128665 http://tiny.cc/bxy24x

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

sir i uses the back up tool but its doesnt work on my pc (Windows 10 32bit), then i use the universal back up tool and work...
and this is my file of backup
http://www.solidfiles.com/d/ae02aac289/

[BDMaster]

I will give a look !
Regards

[Mr.VanHelsing]

ok, thanks sir...

[BDMaster]

Hi mate,
your laptop has an AMD CPU ?
As AMD + Insyde = not reflashable !
Use the Recovery Procedure to flash the Bios Mod, so prepare an
USB Stick Fa32 Formatted and copy into the Recovery File LarneMLX64.fd

http://rghost.net/6H6XTVMxm

Then go into Bios and Disable Secure Boot if present, Set Legacy Bios to USB and
follow this procedure . . .
Performing the emergency flash:

- Shutdown the netbook (notebook)
- Remove all peripheral devices
- Remove battery, Remove AC power cord
- Press and hold the power button for 10 seconds (battery and AC power still out), then release
- Put the USB Memory Stick in the USB port
- Hold "Fn" + "Esc" and plug the AC power cord in
- Now press the power button (whilst still holding Fn + Esc).
Wait until the fan will run, then release "Fn" + "Esc" keys
- The fan will run for about 2-10 minutes and the USB drive activity LED will blink
- I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off

The bios should be updated with the modified BIOS, and boot as per normal.

[Mr.VanHelsing]

Hi mate,
your laptop has an AMD CPU ?
As AMD + Insyde = not reflashable !
Use the Recovery Procedure to flash the Bios Mod, so prepare an
USB Stick Fa32 Formatted and copy into the Recovery File LarneMLX64.fd

http://rghost.net/6H6XTVMxm

Then go into Bios and Disable Secure Boot if present, Set Legacy Bios to USB and
follow this procedure . . .
Performing the emergency flash:

- Shutdown the netbook (notebook)
- Remove all peripheral devices
- Remove battery, Remove AC power cord
- Press and hold the power button for 10 seconds (battery and AC power still out), then release
- Put the USB Memory Stick in the USB port
- Hold "Fn" + "Esc" and plug the AC power cord in
- Now press the power button (whilst still holding Fn + Esc).
Wait until the fan will run, then release "Fn" + "Esc" keys
- The fan will run for about 2-10 minutes and the USB drive activity LED will blink
- I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off

The bios should be updated with the modified BIOS, and boot as per normal.

sorry sir for late responsive,,, i'm not yet try this ..
but i want to try now, before that i want to make sure if it was safe ??? it is the first time for me. i worry if later my pc was risk...

[BDMaster]

Yes it is the Recovery procedure to save our laptop after a Brick !
REgards

[Mr.VanHelsing]

so, its is procedure to unlock my bios or recovery my bios ?

[BDMaster]

Hi mate,
The AMD CPU and Insyde don't give us many choices !
Only Recovery or the Tools (SPI PGM + Clip) look here :

https://www.bios-mods.com/forum/Thread-R...5#pid74575

Let me know
Regards