12-28-2015, 06:16 PM (This post was last modified: 12-28-2015, 09:35 PM by Dizeliun.)
Okay I flashed my BIOS to the file you gave and after following the procedure I still end up with the same issue of having 4GBs of hardware reserved RAM
(12-28-2015, 11:56 PM)DeathBringer Wrote: I need new foto of Product Information page in BIOS.
I posted it along with the BIOS Screen picture in my previous post. It states that it only recognizes 4Gigs. Also since then I have tested my RAM in each slot of the MOBO and this is the following outcome:
**Slot 1 being closest to CPU**
ONE STICK:
-Slot 1: Infinite BEEP
-Slot 2: Boots fine
-Slot 3: Infinite BEEP
-Slot 4: Boots fine
TWO STICKS:
-Slots 1/3: Infinite BEEP
-Slots 2/4: Boots fine
-Slots 1/2: Boots with trouble (boots maybe half the time) shows proper 4GB
-Slots 3/4: Boots with trouble (boots maybe half the time) shows proper 4GB
THREE STICKS:
-Slot 1/2/3: Boots with trouble (Shows inproper 4GB)
FOUR STICKS:
-Boots with extreme difficulty (1/20 times have to keep hardbooting over and over till it finally does a POST beep) shows 4GB Hardware Reserved
Reserved memory is set aside for on board graphics. You should be able to go in to your bios and find video/graphics settings and set how much memory is used. if you have a dedicated video card disable the onboard graphics. Do not disable the graphics if you do not have a dedicated card!!