(03-01-2016, 02:11 PM)DeathBringer Wrote: Do it separately and test system for stability.
At first test memory: at start-up press F8 to get boot manager:
Press Tab to highlight Memory Diagnostic Tool and press Enter.
Not good Deathbringer. I ran the memory diagnostics test and this happened
(03-01-2016, 11:45 PM)DeathBringer Wrote: As I thought.
Boot with one DIMM only at first in slot #1 and test memory again.
Then boot with second DIMM in slot #2 only and test memory again.
My touchsmart won't even turn on now. I plug power cord into touchsmart and the screen will not turn on nor the fans. The green light near power connector will not light either. The weird thing is that when I unplug power cord from touchsmart the green light lights back up. Is my computer done for after those seizures of colored screens?
(03-02-2016, 01:25 AM)DeathBringer Wrote: Try to install old CPU and only one DIMM.
Touchsmart still will not boot up at all. Again I plugged power cord into touchsmart and the screen will not turn on nor the fans. The green light near power connector will not light either. The weird thing is that when I unplug power cord from touchsmart the green light lights back up. Is my computer done for after those seizures of colored screens?
(03-02-2016, 01:54 AM)DeathBringer Wrote: Your computer don't boot up with old CPU and only one DIMM? Than your motherboard died. BSOD's were symptoms of northbridge faulty.
Oh No!!!! It can't be!!! My motherboard died. Now I will never be able to use my touchsmart again. RIP Touchsmart 2009-2016