Ok freind,
there isn't this chance into your Bios but I found something interesting !
EFI IFR Mod :
Bios lock :
0x9C445 Setting: BIOS Lock, Variable: 0x4AB {05 A6 54 07 55 07 16 01 34 12 AB 04 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x9C46B Option: Disabled, Value: 0x0 {09 0E 23 00 00 00 00 00 00 00 00 00 00 00}
0x9C479 Option: Enabled, Value: 0x1 (default) {09 0E 24 00 10 00 01 00 00 00 00 00 00 00}
0x9C487 End of Options {29 02}
setup_var 0x4AB 0x0
ICC Locks after EOP :
0xA059C Setting: ICC Locks after EOP, Variable: 0x305 {05 A6 1B 05 1C 05 E0 01 34 12 05 03 00 10 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0xA05C2 Option: Static registers only, Value: 0x1 (default) {09 0E 1E 05 10 00 01 00 00 00 00 00 00 00}
0xA05D0 Option: All Locked, Value: 0x0 {09 0E 1D 05 00 00 00 00 00 00 00 00 00 00}
0xA05DE Option: All Unlocked, Value: 0x2 {09 0E 1F 05 00 00 02 00 00 00 00 00 00 00}
0xA05EC End of Options {29 02}
BIOS Back Flash :
setup_var 0x305 0x2
0xA48BC Setting: BIOS Back Flash, Variable: 0x220 {05 A6 D4 00 D5 00 09 00 34 12 20 02 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0xA48E2 Option: Disabled, Value: 0x0 (default) {09 0E 23 00 10 00 00 00 00 00 00 00 00 00}
0xA48F0 Option: Enabled, Value: 0x1 {09 0E 24 00 00 00 01 00 00 00 00 00 00 00}
0xA48FE End of Options {29 02}
setup_var 0x220 0x1
If Bios Lock is working then We can reflash your Bios Mod back !
So We have to make some tests using Sleep Bug and EFI IFR FalseClock Method !
Look here :
https://www.bios-mods.com/forum/Thread-R...-EFI-shell
3. Take USB stick and format to FAT32
4. Create directory structure EFI\Boot
5. Download BOOTX64.EFI
http://www.mediafire.com/download.php?81vegw2aw0pxcib
6. Put downloaded file to Boot directory.
7. Restart and enter BIOS setup.
8. Make sure you have following values:
Legacy Support: Disable
Secure Boot: Disable
9. Reboot and press F9 to boot from USB stick
10. Give commands:
setup_var 0x4AB 0x0
setup_var 0x305 0x2
setup_var 0x220 0x1
11. Reboot your Windows and make again a result file
use this tool run It as Admin and upload here the result fle :
http://rghost.net/58219938
http://rghost.net/53128665
Then do this test too :
Try to check the Sleep Bug if is Actived yet !
So put your laptop into Sleep Mode (Close the Lid), and then
Wacke-Up It (open the Lid), then redo the result files !
Let me know
Regards
P.S. Upload all test results files here naming well them !
JUST TO REPLY TO OLEH THAT I HAVE DONE NOTHING

but He what has done so far ?