(09-19-2016, 02:43 PM)DeathBringer Wrote: I've made new mod with updated microcode.
Please flash it & make updated "exported reg entry".
P.S. I use usual disassembler.
Hello,
flash done with mod2 provided rom.
Anything still seems running fine.
And I cannot see any change in CPUZ or even in the registry entry.
Anyway here they are posted.
[HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0]
"Component Information"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"Identifier"="AMD64 Family 16 Model 6 Stepping 3"
"Configuration Data"=hex(9):ff,ff,ff,ff,ff,ff,ff,ff,00,00,00,00,00,00,00,00
"ProcessorNameString"="AMD Athlon X2 280 Processor"
"VendorIdentifier"="AuthenticAMD"
"FeatureSet"=hex(4):fe,7d,3b,24,00,00,00,00
"~MHz"=dword:00000e10
"Update Revision"=dword:010000c8
"Update Status"="Success"
"Previous Update Revision"=dword:00000000
"Platform Specific Field1"=dword:010000c8
Let me know if you want to add comment/other thing inside I should be able to test.
Got a question : did you let the loop jump pointer in place (don't remember if the words are correct for that since it's a long time ago from my studies...) ? or did you implement something else (other than the cpu patch) ?
My thought is HP is locking their mobo and also the model of supported CPU/hardware, even if any componenet is able to drive newer CPU (I choose the X2 280 because I was pretty sure it was working without any mod but ... you know I was wrong on one side but true since the motherboard is very happy with it running now with your mod)
Thanks,
Regards.