(09-22-2016, 02:27 PM)DeathBringer Wrote: OK. Can you make "exported reg entry" with native CPU?
Hello,
Yes I can of course since the CPU were exchanged a lot of time, I decided to change heatsik and let the cas open so now I can remove it and heatsink in a few seconds.
I'll do it this morning, I mean in few hours. And post it.
Regards.
Hello,
sorry for the dealy. I had trouble with my SAS raid card on another machine so I had to troubleshoot this first.
Here the reg and screenshot.
[HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0]
"Component Information"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"Identifier"="AMD64 Family 16 Model 6 Stepping 2"
"Configuration Data"=hex(9):ff,ff,ff,ff,ff,ff,ff,ff,00,00,00,00,00,00,00,00
"ProcessorNameString"="AMD Athlon X2 250 Processor"
"VendorIdentifier"="AuthenticAMD"
"FeatureSet"=hex(4):fe,7d,3b,24,00,00,00,00
"~MHz"=dword:00000bb8
"Update Revision"=dword:010000c7
"Update Status"="Success"
"Previous Update Revision"=dword:00000000
"Platform Specific Field1"=dword:010000c7
(09-24-2016, 03:59 AM)DeathBringer Wrote: As I thought. I've made fourth mod.
Make new "exported reg entry" with native or new CPU after flashing and reboot.
Hello,
Don't know if this is what's you're expecting but here it is after mod4 flash.
Since I do not want to die idiot if you please can just at the end explain what's happening I would be happy.
[HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0]
"Component Information"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"Identifier"="AMD64 Family 16 Model 6 Stepping 2"
"Configuration Data"=hex(9):ff,ff,ff,ff,ff,ff,ff,ff,00,00,00,00,00,00,00,00
"ProcessorNameString"="AMD Athlon X2 250 Processor"
"VendorIdentifier"="AuthenticAMD"
"FeatureSet"=hex(4):fe,7d,3b,24,00,00,00,00
"~MHz"=dword:00000bb8
"Update Revision"=dword:010000c7
"Update Status"="Success"
"Previous Update Revision"=dword:00000000
"Platform Specific Field1"=dword:010000c7
09-24-2016, 05:04 PM (This post was last modified: 09-24-2016, 05:18 PM by DeathBringer.)
(09-24-2016, 03:35 PM)JeanGab31 Wrote: Since I do not want to die idiot if you please can just at the end explain what's happening I would be happy.
As I said
(09-20-2016, 02:02 PM)DeathBringer Wrote: Microcode isn't loaded from BIOS. ... Now I try to fix microcode loading.
but I wasn't successful. So just use my first mod. Windows load the newest microcode itself.
BTW: native BIOS didn't load microcode for AM3 CPU too.
Please post new topic in Confirmed CPU Support Upgrades with attached BIOS mod.
And add "[Solved]" to this topic's header by editing first post.
P.S. You can delete your BIOS backup from this topic...
Posts: 2
Threads: 0
Joined: Mar 2018
Reputation:
0
(03-23-2018, 01:03 PM)DeathBringer Wrote: This motherboard should support almost all CPUs for AM3 with my mod.
Many thanks for the quick response!
Now, just to demonstrate how much of a novice I am, I've read through https://www.bios-mods.com/bios-update/ and it states... Copy the BIOS update image that you want to flash to the USB flashdrive (If you are unsure of where to get this, please post in our forums). For the Award platform, the BIOS file should be named “bios.bin”; for AMI, it should be named “bios.rom”; and for Phoenix, it should be named “bios.bin”
The filename for your mod is NUT5.12 but with no extension. Yes I know you will think I am completely thick but if you can point me or fill in the gaps it would be very much appreciated?
06-11-2018, 08:53 AM (This post was last modified: 06-11-2018, 09:14 AM by shorterxp.)
Hi,
@Deathbringer, is there a way to apply your updated Nutmeg microcode without using sp43067.exe? This seems to be a Vista+ specific utility. i.e. It wont complete on XP.
I was thinking maybe AMI Flash utility from 2011 (see below), but would greatly appreciate some reassurance before I brick this.