04-11-2017, 09:54 AM
Hi, i have a gigabyte GA-H55M-UD2H rev 1.3 with bios F11 and the board supports some Lynnfield b1 xeon chips (X3480/X3450/L3426), so i bought a cheapĀ X3430 (Lynnfield B1 2.4Ghz 8Mb) to replace my pentium G6950.
When i install the xeon and press power botton, fans spin for half a second and stop in an endless loop, the processor doesn't even get warm, by my experience with amd boards the board should boot and at worst case show a warning message "unknown processor", at this point i don't know if i have a bad CPU or this is the normal behavior for unknown CPUS at intel platforms, the bios is an 8Mb file Award V6.00PG according to Award slic mod v1.37
Unfortunately i don't have other mainboard to test the CPU, Can anyone update the microcode of the bios to add compatibillity with the X3430?
Don't worry if the board gets bricked as i have an external programmer and proper tools if something goes really wrong.
Bios download link:
http://download.gigabyte.eu/FileList/BIO...2h_f11.exe
Thanks in advance.
When i install the xeon and press power botton, fans spin for half a second and stop in an endless loop, the processor doesn't even get warm, by my experience with amd boards the board should boot and at worst case show a warning message "unknown processor", at this point i don't know if i have a bad CPU or this is the normal behavior for unknown CPUS at intel platforms, the bios is an 8Mb file Award V6.00PG according to Award slic mod v1.37
Unfortunately i don't have other mainboard to test the CPU, Can anyone update the microcode of the bios to add compatibillity with the X3430?
Don't worry if the board gets bricked as i have an external programmer and proper tools if something goes really wrong.
Bios download link:
http://download.gigabyte.eu/FileList/BIO...2h_f11.exe
Thanks in advance.