Output '!!!OEMID Missmatch!!!' message and can't flash file.
bat
@echo off
efiflash.exe AB350MG3.F4 /nr /c \NoOemId
I try your method.
and efiflash output : !!! Not able to Read BIOS File Successfully !!!
to start all over again
1. what is needed SLIC
2. when you call, then give flash a OemId
3. make backup of the BIOS and give me
4. get BIOS with slic
I Successfully flash but don't work slic keys.
I open rw-everything and view ACPI Tables.
but don't have SLIC Table.(BIOS is modified by PhoenixTool 2.66)
AB350MG3_SLIC.zip is Modified BIOS(modified by PhoenixTool 2.66)
AcpiTblsModified.zip is RW-Everything report when Modified BIOS
AcpiTbls.zip is RW-Everything report when original BIOS
Posts: 335
Threads: 0
Joined: Feb 2010
Reputation:
33
and efiflash output : !!! Not able to Read BIOS File Successfully !!!
to start all over again
1. what is needed SLIC
2. when you call, then give flash a OemId
3. make backup of the BIOS and give me
4. get BIOS with slic
I Successfully flash but don't work slic keys.
I open rw-everything and view ACPI Tables.
but don't have SLIC Table.(BIOS is modified by PhoenixTool 2.66)
AB350MG3_SLIC.zip is Modified BIOS(modified by PhoenixTool 2.66)
AcpiTblsModified.zip is RW-Everything report when Modified BIOS
AcpiTbls.zip is RW-Everything report when original BIOS
1. flash original BIOS (reboot)
2. from Windows administrator to run OA3ini.bat (reboot)
3. from Q-flash backup BIOS and give me
Posts: 20
Threads: 6
Joined: Nov 2015
Reputation:
0
and efiflash output : !!! Not able to Read BIOS File Successfully !!!
to start all over again
1. what is needed SLIC
2. when you call, then give flash a OemId
3. make backup of the BIOS and give me
4. get BIOS with slic
I Successfully flash but don't work slic keys.
I open rw-everything and view ACPI Tables.
but don't have SLIC Table.(BIOS is modified by PhoenixTool 2.66)
AB350MG3_SLIC.zip is Modified BIOS(modified by PhoenixTool 2.66)
AcpiTblsModified.zip is RW-Everything report when Modified BIOS
AcpiTbls.zip is RW-Everything report when original BIOS
1. flash original BIOS (reboot)
2. from Windows administrator to run OA3ini.bat (reboot)
3. from Q-flash backup BIOS and give me
Yes. i did it.
and get this backuped bios.
Posts: 335
Threads: 0
Joined: Feb 2010
Reputation:
33
05-22-2017, 01:20 PM (This post was last modified: 05-22-2017, 01:41 PM by 555LE.)
(05-22-2017, 12:40 PM)minseung0119 Wrote:
(05-22-2017, 12:00 PM)555LE Wrote:
(05-22-2017, 11:18 AM)minseung0119 Wrote:
(05-22-2017, 10:35 AM)555LE Wrote:
(05-22-2017, 10:10 AM)minseung0119 Wrote: I try your method.
and efiflash output : !!! Not able to Read BIOS File Successfully !!!
to start all over again
1. what is needed SLIC
2. when you call, then give flash a OemId
3. make backup of the BIOS and give me
4. get BIOS with slic
I Successfully flash but don't work slic keys.
I open rw-everything and view ACPI Tables.
but don't have SLIC Table.(BIOS is modified by PhoenixTool 2.66)
AB350MG3_SLIC.zip is Modified BIOS(modified by PhoenixTool 2.66)
AcpiTblsModified.zip is RW-Everything report when Modified BIOS
AcpiTbls.zip is RW-Everything report when original BIOS
1. flash original BIOS (reboot)
2. from Windows administrator to run OA3ini.bat (reboot)
3. from Q-flash backup BIOS and give me
Yes. i did it.
and get this backuped bios.
4. from DOS run Slic.bat
5. look slic and write a review sorry corrected bat http://rgho.st/8FnxRMYk8