Welcome
|
You have to register before you can post on our site.
|
|
Please modded Clevo W650sj laptop bios?
|
Posts: 1
Threads: 1
Joined: Oct 2014
Reputation:
0
Dear Bios-Mods community,
I currently own a Clevo W650SF with a Intel i7 4710MQ and a GeForce GT840M, however, since I applied some arctic diamond cooling paste my processor runs at around 56 degrees C max when running prime95, with the fan not even maxing out, and turbo boost going up to about 3.2GHz. So there's plenty of room for overclocking i suppose.
However, the standard BIOS is very limited and Intel XTU does not allow me to overclock as well. I looked around for bios mods for this particular model without finding any.
Thus i would greatly appreciate it if someone could build me a custom bios, or port a custom bios from another model to work with this particular one.
Thanks in advance!
P.S.: A link to a comprehensive guide on how to do it on my own would be greatly appreciated as well.
Posts: 1
Threads: 0
Joined: Mar 2016
Reputation:
0
hi all. i have a laptop clevo w650sf spec: i7 4710 mq geforce 840m. i want unlocked bios for this model if exists
Thanks in advance
Posts: 12
Threads: 0
Joined: Apr 2017
Reputation:
0
06-26-2017, 01:47 PM
(This post was last modified: 06-26-2017, 02:08 PM by edneyhelene.)
Hello there, i would like to have an unlocked and full updated modules (unified bios updater) for my W650sj clevo laptop!
I do have 4810mq and gtx 850m gddr3.
Can anyone please give me a hand with it?
Premamod is down and i have no access to it =(
I do also have spi programmer if needed, this is not a problem
Bios file location: https://repo.palkeo.com/clevo-mirror/W650SJ/
thanks in advance
Posts: 26
Threads: 1
Joined: Apr 2017
Reputation:
2
Posts: 12
Threads: 0
Joined: Apr 2017
Reputation:
0
(06-27-2017, 02:21 AM)34kon Wrote: Hi.
Your mod bios done
https://www.sendspace.com/file/5v1nbc
Nice thank you so much!
I do need a little help, this laptop has gone bad flash yesterday before try your mod and the eeprom recorder is not able to recognize the flash chip, it does have two flashchips
The eeprom flasher is ch341A (black), im using software version 1.29...do you have any new version or tip for me? When i try to program it says " time out" but im able to read and erase.
Here the chip pics:
Posts: 26
Threads: 1
Joined: Apr 2017
Reputation:
2
(06-28-2017, 06:51 AM)edneyhelene Wrote: (06-27-2017, 02:21 AM)34kon Wrote: Hi.
Your mod bios done
https://www.sendspace.com/file/5v1nbc
Nice thank you so much!
I do need a little help, this laptop has gone bad flash yesterday before try your mod and the eeprom recorder is not able to recognize the flash chip, it does have two flashchips
The eeprom flasher is ch341A (black), im using software version 1.29...do you have any new version or tip for me? When i try to program it says " time out" but im able to read and erase.
Here the chip pics:
Solder the chip
Posts: 12
Threads: 0
Joined: Apr 2017
Reputation:
0
Well my friend i have bought 3 chips. them all 25x32 and 3.3V
recorded them all and still same problem, i was able to flash the bios into them but the laptop turns on, black screen, and then after 30 seconds it turns off and reboots.
i have also replaced the Me chip and flashed intel me firmware into it... Still no lucky =((
any tips? i think i may be missing something!
The file W650SJ.06 have 4mb and is the one that fits the bios chip and its the one i flashed!
the other file is W650SJ6M.06 wich is 6mb and wont fit the chip that came with the laptop. but i was also ready to try it too and tried, of course that when its flashed the laptop dies.
So we flashed back the w650sj.06 and the same symptoms are back, lights up, black screen, after 20 seconds it turns off.
On the Me chip we flashed 9.1.37.1002_1.5MB_PRD_RGN.bin (1,5mb) this chip have only 2mb flash area;
Whats wrong? isnt it okey? why i still have black screen?
Still no solution!
Posts: 12
Threads: 0
Joined: Apr 2017
Reputation:
0
(06-28-2017, 08:31 AM)34kon Wrote: (06-28-2017, 06:51 AM)edneyhelene Wrote: (06-27-2017, 02:21 AM)34kon Wrote: Hi.
Your mod bios done
https://www.sendspace.com/file/5v1nbc
Nice thank you so much!
I do need a little help, this laptop has gone bad flash yesterday before try your mod and the eeprom recorder is not able to recognize the flash chip, it does have two flashchips
The eeprom flasher is ch341A (black), im using software version 1.29...do you have any new version or tip for me? When i try to program it says " time out" but im able to read and erase.
Here the chip pics:
Solder the chip
Solder chip worked but i think im not using the right file for Me chip and for bios chip, can u please check out my last post and tell me if im doing anything wrong with ch341A flasher?
Posts: 26
Threads: 1
Joined: Apr 2017
Reputation:
2
(06-28-2017, 10:58 PM)edneyhelene Wrote: (06-28-2017, 08:31 AM)34kon Wrote: (06-28-2017, 06:51 AM)edneyhelene Wrote: (06-27-2017, 02:21 AM)34kon Wrote: Hi.
Your mod bios done
https://www.sendspace.com/file/5v1nbc
Nice thank you so much!
I do need a little help, this laptop has gone bad flash yesterday before try your mod and the eeprom recorder is not able to recognize the flash chip, it does have two flashchips
The eeprom flasher is ch341A (black), im using software version 1.29...do you have any new version or tip for me? When i try to program it says " time out" but im able to read and erase.
Here the chip pics:
Solder the chip
Solder chip worked but i think im not using the right file for Me chip and for bios chip, can u please check out my last post and tell me if im doing anything wrong with ch341A flasher? Flash EC
Posts: 12
Threads: 0
Joined: Apr 2017
Reputation:
0
06-29-2017, 07:46 AM
(This post was last modified: 06-29-2017, 07:55 AM by edneyhelene.)
(06-29-2017, 12:38 AM)34kon Wrote: (06-28-2017, 10:58 PM)edneyhelene Wrote: (06-28-2017, 08:31 AM)34kon Wrote: (06-28-2017, 06:51 AM)edneyhelene Wrote: (06-27-2017, 02:21 AM)34kon Wrote: Hi.
Your mod bios done
https://www.sendspace.com/file/5v1nbc
Nice thank you so much!
I do need a little help, this laptop has gone bad flash yesterday before try your mod and the eeprom recorder is not able to recognize the flash chip, it does have two flashchips
The eeprom flasher is ch341A (black), im using software version 1.29...do you have any new version or tip for me? When i try to program it says " time out" but im able to read and erase.
Here the chip pics:
Solder the chip
Solder chip worked but i think im not using the right file for Me chip and for bios chip, can u please check out my last post and tell me if im doing anything wrong with ch341A flasher? Flash EC
Ok but EC should go where? EC should go on Me chip or bios chip? can u please give me the complete path to restore it all in case iun missing something? Please give me the step by step to make this laptop alive again with the ch341A flasher. im a little lost with the files and chips and i think there must be something im missing,
|
Users browsing this thread: 17 Guest(s)
|