HP Z400 SLIC 2.1 Request

[Computer-Drop-Out]

Purchased a replacement motherboard off of eBay - and there is no SLIC table in the bios.

I've attached the RW table from another HP Z400 with the same motherboard and bios that does have an SLIC table.
(I could not open the ACPI table on the machine in question - kept getting an error.

The current bios version is 3.57
http://h20564.www2.hp.com/hpsc/swd/publi...id=3718669&swItemId=wk_122938_1&swEnvOid=4059


Running Win7 Pro 64 bit


I've attached the Acpi table from RW (Rar format to upload)
I've attached the bin file from the 3.57 bios (link above)


Thanks!

[Computer-Drop-Out]

Purchased a replacement motherboard off of eBay - and there is no SLIC table in the bios.

I've attached the RW table from another HP Z400 with the same motherboard and bios that does have an SLIC table.
(I could not open the ACPI table on the machine in question - kept getting an error.

The current bios version is 3.57
http://h20564.www2.hp.com/hpsc/swd/publi...id=3718669&swItemId=wk_122938_1&swEnvOid=4059


Running Win7 Pro 64 bit


I've attached the Acpi table from RW (Rar format to upload)
I've attached the bin file from the 3.57 bios (link above)


Thanks!

Going another track - is there a way to copy the contents of the bios chip on the good computer and reflash it on the computer w/o the slic table? I'd then need to edit and change the unique data (ie: serial #, Mac, UUID, etc) to keep the two machine identities intact.

[BDMaster]

This Bios is RSA Signed not moddable !!!
Use an SLP Marker to enable slic 2.1 look here :

http://forums.mydigitallife.info/threads...-Utilities

regards

[kofil]

hello my motherboard does not give me the image of the crashing device can you help me with the motherboard's biosuna printer with miniprogrammer