Unlocking the E11IS2 BIOS

[Sml6397]

Hello danpedron,

Does this issue occur with the stock (unmodified) BIOS image or just the modified BIOS image? It shouldn't occur with the modified BIOS image if it doesn't appear with the stock image. It may be an incompatible setting being displayed in one of the menus (probably the Main Menu).

The best way to test this is to flash the stock image and then try to enter the BIOS Menus. But I would prefer to keep the number of BIOS flashes to a minimum, so I will assume that the issue is only with the modified image. I will look into the settings right now.

~Steven

---

Edit: I am going to remove the extra settings from the Main Menu. I think that one of them is incompatible with the notebook or is corrupted somewhere in the code of one of the modules that I have not modified or looked at within the BIOS image.

[Sml6397]

Hello E11IS2 BIOS flashers,

I have created a second version of the original BIOS mod. The BIOS mod can be found at the bottom of this post. This version has all of the same modifications as the previous one with the exception of the Main Menu. I have reverted the customized Main Menu back to its original appearance before the mods. I did this because people who flashed the notebook BIOS were getting black screens upon entering the BIOS Setup Utility. My theory is that there was some unlocked menu item in the customized Main Menu that was incompatible with the notebook or corrupted somehow, thus causing the BIOS Setup Utility to return a blank screen upon entering.

Please flash this BIOS mod and tell me the results. If my theory is correct, the BIOS Setup Utility should no longer return a black screen upon entering.

Generic Warnings/Disclaimers:

Please remember to take proper precautions when flashing your BIOS. Even if the BIOS image is safe, the flashing process can still fail. Make sure that [if applicable] your notebook is fully charged (100%), that the power adapter is properly connected, and that the chance of a power outage occurring is as minimal as possible. Do not interrupt the flashing process. If possible, it is good practice to have a working CRISIS recovery disk handy when flashing your BIOS. Use the flashing instructions for your particular computer brand. DO NOT DO ANYTHING UNNECESSARY!!!

I take absolutely NO responsibility for ANY damages that may occur to you, your computer, your personal belongings, your neighbor's cat, or any other personnel or equipment as a direct or indirect result or consequence of your, or any one else's, use or misuse of any of the files that are in this archive at the present or at any time in the past or the future. You assume full responsibility for any damages or inconveniences that may occur by choosing to flash, or otherwise use or misuse, this image or any of the other files within this archive.

Have fun!

Please remember to post the results of the BIOS flash!

HASH VERIFICATION (onlinemd5.com):
MD5: 45AA0BF43D283A90158A74251D2E8B22
SHA-1: CD7829BA28378856F8CBA96376C7F2E1EB7B1E42

~Steven

[rltl1997]

Hello all,

This thread will contain an unlocked BIOS image for the E11IS2 notebook as soon as BIOS mod verification checks are complete.

Pictures (these are only the largest menus, other settings can be found by emulating/flashing this BIOS image):

Hi Steven !
Nice work !!!
Regards



~Steven

friend works with Phoenix securecore tiano uefi

[aet2k3]

Hello E11IS2 BIOS flashers,

I have created a second version of the original BIOS mod. The BIOS mod can be found at the bottom of this post. This version has all of the same modifications as the previous one with the exception of the Main Menu. I have reverted the customized Main Menu back to its original appearance before the mods. I did this because people who flashed the notebook BIOS were getting black screens upon entering the BIOS Setup Utility. My theory is that there was some unlocked menu item in the customized Main Menu that was incompatible with the notebook or corrupted somehow, thus causing the BIOS Setup Utility to return a blank screen upon entering.

Please flash this BIOS mod and tell me the results. If my theory is correct, the BIOS Setup Utility should no longer return a black screen upon entering.

Generic Warnings/Disclaimers:

Please remember to take proper precautions when flashing your BIOS. Even if the BIOS image is safe, the flashing process can still fail. Make sure that [if applicable] your notebook is fully charged (100%), that the power adapter is properly connected, and that the chance of a power outage occurring is as minimal as possible. Do not interrupt the flashing process. If possible, it is good practice to have a working CRISIS recovery disk handy when flashing your BIOS. Use the flashing instructions for your particular computer brand. DO NOT DO ANYTHING UNNECESSARY!!!

I take absolutely NO responsibility for ANY damages that may occur to you, your computer, your personal belongings, your neighbor's cat, or any other personnel or equipment as a direct or indirect result or consequence of your, or any one else's, use or misuse of any of the files that are in this archive at the present or at any time in the past or the future. You assume full responsibility for any damages or inconveniences that may occur by choosing to flash, or otherwise use or misuse, this image or any of the other files within this archive.

Have fun!

Please remember to post the results of the BIOS flash!

HASH VERIFICATION (onlinemd5.com):
MD5: 45AA0BF43D283A90158A74251D2E8B22
SHA-1: CD7829BA28378856F8CBA96376C7F2E1EB7B1E42

~Steven

Works Perfect Steven, not blackscreen anymore. Thank you!

[Sml6397]

Hello E11IS2 BIOS flashers,

I have created a second version of the original BIOS mod. The BIOS mod can be found at the bottom of this post. This version has all of the same modifications as the previous one with the exception of the Main Menu. I have reverted the customized Main Menu back to its original appearance before the mods. I did this because people who flashed the notebook BIOS were getting black screens upon entering the BIOS Setup Utility. My theory is that there was some unlocked menu item in the customized Main Menu that was incompatible with the notebook or corrupted somehow, thus causing the BIOS Setup Utility to return a blank screen upon entering.

Please flash this BIOS mod and tell me the results. If my theory is correct, the BIOS Setup Utility should no longer return a black screen upon entering.

Generic Warnings/Disclaimers:

Please remember to take proper precautions when flashing your BIOS. Even if the BIOS image is safe, the flashing process can still fail. Make sure that [if applicable] your notebook is fully charged (100%), that the power adapter is properly connected, and that the chance of a power outage occurring is as minimal as possible. Do not interrupt the flashing process. If possible, it is good practice to have a working CRISIS recovery disk handy when flashing your BIOS. Use the flashing instructions for your particular computer brand. DO NOT DO ANYTHING UNNECESSARY!!!

I take absolutely NO responsibility for ANY damages that may occur to you, your computer, your personal belongings, your neighbor's cat, or any other personnel or equipment as a direct or indirect result or consequence of your, or any one else's, use or misuse of any of the files that are in this archive at the present or at any time in the past or the future. You assume full responsibility for any damages or inconveniences that may occur by choosing to flash, or otherwise use or misuse, this image or any of the other files within this archive.

Have fun!

Please remember to post the results of the BIOS flash!

HASH VERIFICATION (onlinemd5.com):
MD5: 45AA0BF43D283A90158A74251D2E8B22
SHA-1: CD7829BA28378856F8CBA96376C7F2E1EB7B1E42

~Steven

Works Perfect Steven, not blackscreen anymore. Thank you!

Hello aet2k3,

I am glad that the mod worked for you! Thank you for confirming that it worked!

[MATIAS]

Hello, should not be unlocked after Flashing the bios? The TPM is still locked after restoring the Bios to the default settings. What I can do? regards!.

[Antonioledezma20]

No se puede descargar el archivo, simplemente queda en 0 bit

[Juanlima1994]

Hola flashes E11IS2 BIOS,

he creado una segunda versión del mod BIOS original. El mod BIOS se puede encontrar en la parte inferior de esta publicación. Esta versión tiene todas las mismas modificaciones que la anterior con la excepción del menú principal. He revertido el menú principal personalizado a su aspecto original antes de los mods. Hice esto porque las personas que flashearon el BIOS del portátil obtenían pantallas negras al ingresar a la Utilidad de configuración del BIOS. Mi teoría es que había algún elemento de menú desbloqueado en el menú principal personalizado que era incompatible con el portátil o dañado de alguna manera, lo que causaba que la utilidad de configuración del BIOS devolviera una pantalla en blanco al ingresar.

Por favor, muestra esta modificación BIOS y dime los resultados. Si mi teoría es correcta, la Utilidad de configuración del BIOS ya no debería devolver una pantalla en negro al ingresar.

Advertencias / renuncias genéricas:

Recuerde tomar las precauciones adecuadas al actualizar su BIOS. Incluso si la imagen del BIOS es segura, el proceso de flasheo aún puede fallar. Asegúrese de que [si corresponde] su computadora portátil esté completamente cargada (100%), de que el adaptador de corriente esté conectado correctamente y de que la posibilidad de que se produzca un corte de energía sea lo más mínima posible. No interrumpa el proceso de flasheo. Si es posible, es una buena práctica tener a mano un disco de recuperación de CRISIS en funcionamiento cuando esté flasheando su BIOS. Use las instrucciones que parpadean para su marca de computadora en particular. NO HAGAS NADA INNECESARIO!

No me responsabilizo en absoluto de CUALQUIER daño que pueda ocurrirle a usted, su computadora, sus pertenencias personales, el gato de su vecino o cualquier otro personal o equipo como resultado o consecuencia directa o indirecta del uso o mal uso de usted o de cualquier otra persona. de cualquiera de los archivos que se encuentran en este archivo en el presente o en cualquier momento en el pasado o en el futuro. Usted asume la total responsabilidad por los daños o inconvenientes que puedan ocurrir al elegir flashear, o usar o usar de forma incorrecta esta imagen o cualquiera de los otros archivos dentro de este archivo.

¡Que te diviertas!

¡Por favor, recuerde publicar los resultados del flash de BIOS!

VERIFICACIÓN DE HASH (onlinemd5.com):
MD5: 45AA0BF43D283A90158A74251D2E8B22
SHA-1: CD7829BA28378856F8CBA96376C7F2E1EB7B1E42

~ Steven

Works Perfect Steven, ya no la pantalla negra. ¡Gracias!

colega como hiciste para flashear la bios ya tengo los archivos montados en el pendriver pero no hay que combinar con las teclas o que hacer para leer que lo que está esta en el pendriver

[men_dvz]

Hi. I would like to know if the TPM module in your bios is enabled by default, because somebody broken a pin on the tmp chip of the motherboard and I want to recover the mother. Because it doesn't boot now.

[men_dvz]

Fixed the tpm problem with a pencil mine and tape, because it was too small for me to solder it.