[REQUEST] Alienware X51 R3 BIOS unlock，3Q

[iamyangyi@126.com]

Thank you for helping me to show the hide menu or OC memory timing menu display, or tutorial methods can also be provided.
   
  1212.zip (Size: 4.58 MB / Downloads: 22)

[Lost_N_BIOS]

Do you want hide this menu, or make visible so you can see in BIOS? If you want to hide menu, go to "Main" and in root of "Main" scroll down until you find OC entry listed above NB Porting and set "Show" for OC To "NO"

[iamyangyi@126.com]

Do you want hide this menu, or make visible so you can see in BIOS?  If you want to hide menu, go to "Main" and in root of "Main" scroll down until you find OC entry listed above NB Porting and set "Show" for OC To "NO"

Sorry, I didn't say I wanted to show the hidden menu.

[Lost_N_BIOS]

Please put in zip file, images of your BIOS main page, advanced page, security page, exit page, and make sure at least a few of those also show all visible tabs/sections so can see what all your stock BIOS has enabled. The above 1212 attached file, is stock BIOS, not edited correct? If not, and you edited it already, please link me to stock BIOS download page.

Go to "Setup" section in AMIBCP, then on right where you see OC set "User" This may not work, other method may need to be applied. If this makes section appear in BIOS, but no settings inside, then go to image you showed that section and set all to user (This will not help if what I show below in image does not make menu show up in BIOS, other methods will be required to enable)

[iamyangyi@126.com]

Please put in zip file, images of your BIOS main page, advanced page, security page, exit page, and make sure at least a few of those also show all visible tabs/sections so can see what all your stock BIOS has enabled.  The above 1212 attached file, is stock BIOS, not edited correct?  If not, and you edited it already, please link me to stock BIOS download page.

Go to "Setup" section in AMIBCP, then on right where you see OC set "User"  This may not work, other method may need to be applied.  If this makes section appear in BIOS, but no settings inside, then go to image you showed that section and set all to user (This will not help if what I show below in image does not make menu show up in BIOS, other methods will be required to enable)

Thank you. This is the 1212.ZIP is original BIOS file of X51, but I also changed the OC menu to USER, but there is an EFI BIOS interface similar to MSI, which does not display the modified results, and the OC menu is still not displayed. What should I do?

[genius239]

Please put in zip file, images of your BIOS main page, advanced page, security page, exit page, and make sure at least a few of those also show all visible tabs/sections so can see what all your stock BIOS has enabled.  The above 1212 attached file, is stock BIOS, not edited correct?  If not, and you edited it already, please link me to stock BIOS download page.

Go to "Setup" section in AMIBCP, then on right where you see OC set "User"  This may not work, other method may need to be applied.  If this makes section appear in BIOS, but no settings inside, then go to image you showed that section and set all to user (This will not help if what I show below in image does not make menu show up in BIOS, other methods will be required to enable)

Thank you. This is the 1212.ZIP is original BIOS file of X51, but I also changed the OC menu to USER, but there is an EFI BIOS interface similar to MSI, which does not display the modified results, and the OC menu is still not displayed. What should I do?

~~Hi~
Does interface of bios like this??
https://i.imgur.com/FtGsRus.jpg

If it is ,OC tab is not hidden ,i think you can going to oc tab but you can't see all items .
So,maybe you can try set access/use to user on sub items that you can't see on bios.
https://i.imgur.com/CCb9NcC.jpg

The structure on this bios ,i think use amibcp should can unlock some items.
Maybe you can post a screen that you can see on OC tab ,we can know it more.

[iamyangyi@126.com]

请输入zip文件，BIOS主页图片，高级页面，安全页面，退出页面，并确保其中至少一些还显示所有可见的标签/部分，以便查看所有库存BIOS已启用的内容。以上1212附件，是库存BIOS，编辑不正确吗？如果没有，并且您已经编辑过，请将我链接到库存BIOS下载页面。

转到AMIBCP中的“设置”部分，然后在右侧看到OC设置“用户”这可能不起作用，可能需要应用其他方法。如果这使得部分出现在BIOS中，但内部没有设置，那么转到图像你显示该部分并将所有设置为用户（如果我在图像中显示的内容没有使菜单显示在BIOS中，这将无济于事，其他方法将被要求启用）

谢谢。这是1212.ZIP是X51的原始BIOS文件，但我也将OC菜单更改为USER，但是有一个类似于MSI的EFI BIOS界面，它不显示修改后的结果，并且OC菜单仍然没有显示。我该怎么办？

~~嗨〜
毕竟bios的界面怎么样？
https://i.imgur.com/FtGsRus.jpg

如果是，OC选项卡没有隐藏，我想你可以去oc标签，但你看不到所有的项目。
因此，也许您可以尝试在BIOS上看不到的子项上设置访问/使用权限。
https://i.imgur.com/CCb9NcC.jpg

这个bios的结构，我认为使用amibcp应该可以解锁一些项目。
也许你可以发布一个你可以在OC标签上看到的屏幕，我们可以更多地了解它。

Thank you very much. I really want the hidden menu under the OC menu. Then I will change the sub-item below to USER and try again. Are you talking about a change like this?

[Lost_N_BIOS]

So, with change to OC root, can you see OC menu on main page like Genius showed above or not?
Right now, I'm not asking about individual settings, only getting the menu enabled, showing OC menu at root level in BIOS, do you see that with AMIBCP Change or no?

Please zip some images of your BIOS, showing the main summary page like Genius239 showed above, and then several of the internal pages with the individual settings too so I can see all currently visible sections in there.

I see each setting within contains
Gray Out If
And
Suppress If {0A 82}
True {46 02}

So these must be all changed, once root level is enabled, but that requires a different modification itself too (if AMIBCP is not enabling it at the very root level)

[iamyangyi@126.com]

So, with change to OC root, can you see OC menu on main page like Genius showed above or not?  
Right now, I'm not asking about individual settings, only getting the menu enabled, showing OC menu at root level in BIOS, do you see that with AMIBCP Change or no?

Please zip some images of your BIOS, showing the main summary page like Genius239 showed above, and then several of the internal pages with the individual settings too so I can see all currently visible sections in there.

I see each setting within contains
Gray Out If
And
Suppress If {0A 82}
True {46 02}

So these must be all changed, once root level is enabled, but that requires a different modification itself too (if AMIBCP is not enabling it at the very root level)

3Q，OC menu item itself is visible, mainly OC submenu hidden many functions, I changed to "USER" after brushing in, or did not change.

[Lost_N_BIOS]

OK, great, thank you for the new image! OC Root menu is visible, that is good!
Now, all we need to do is change each of the settings gray out and Suppress if values for each setting. This is done via IFR output and hex editing

Extract setup module PE32, get IFR using Universal IFR extractor, then view each item under "Form: OC" and you'll see each setting has "Gray out If" and "Suppress If True"

Here is 0.7 version of Universal IFR Extractor
https://www.sendspace.com/file/na2ybc

Here is how you change those, open setup.sct in hex editor, find the Form: OD ID via hex (01 86 13 27 1F 00) then change from this bold items below
Form: OC, FormId: 0x2713 {01 86 13 27 1F 00}
0x28615 Gray Out If {19 82}
0x28617 QuestionId: 0xA79 equals value 0x1 {12 06 79 0A 01 00}
0x2861D Gray Out If {19 82}
0x2861F QuestionId: 0xA79 equals value 0x1 {12 06 79 0A 01 00}
0x28625 Suppress If {0A 82}
0x28627 True {46 02}

To this (And do same for any/all settings following within the OC menu area). You can test the root level changes only first, changing this one may unlock them all, but I doubt it since each one has it's own gray/suppress constraints.... Probably have to do each one individually

Form: OC, FormId: 0x2713 {01 86 13 27 1F 00}
0x28615 Gray Out If {19 82}
0x28617 QuestionId: 0xA79 equals value 0x1 {12 06 79 0A FF 00}<< this will change to Value = 0xFF on your modified file's IFR output
0x2861D Gray Out If {19 82}
0x2861F QuestionId: 0xA79 equals value 0x1 {12 06 79 0A FF 00} << this will change to Value = 0xFF on your modified file's IFR output
0x28625 Suppress If {0A 82}
0x28627 True {47 02} << this will change to False on your modified file's IFR output

If you need this done for you, I can do later tonight if Genius239 does not get to it before I have time (Thanks if you do Genius239!)