Welcome
|
You have to register before you can post on our site.
|
|
[REQUEST] Asus ROG GL502VSK (Kaby Lake) BIOS Unlock
|
Posts: 25
Threads: 0
Joined: Nov 2018
Reputation:
0
(11-18-2018, 12:43 AM)Lost_N_BIOS Wrote: That's not possible I don't think, maybe it didn't flash or auto-recovered to stock?
Please show me image of the flash going through OK (ie reflash it and show me image of the process)
Seems like maybe it didn't flash like it may have appeared
grub
flashing
when restarting after installation, a black screen hangs for 10 seconds, then the asus logo appears and I enter the BIOS. Also after installation, the Secure boot parameter returns to enable. And it becomes necessary to change the parameter in grub.
Posts: 25
Threads: 0
Joined: Nov 2018
Reputation:
0
11-19-2018, 12:20 PM
(This post was last modified: 11-19-2018, 12:45 PM by BuP4uk.)
Need help!
After installing genius239 mod, I rebooted the laptop and tried to enter the BIOS, now I can’t go in there, the black screen constantly hangs, and I also cannot restore the BIOS using the fpt backup, it gives the
Error 368 error message: Failed to write the BIOS space.
FPT Operation Failed.
How i can install backup without change setup_var in efi shell ?
Winflash says what i have last bios version.
Allready solved
Posts: 1,776
Threads: 0
Joined: Aug 2018
Reputation:
42
FPT error 368 can be overcome using this guide, any time you flash stock BIOS region you will have to change that again in Grub
https://www.win-raid.com/t3908f16-GUIDE-Grub-Setup-Var-Guide-Fix-Intel-FPT-Error-BIOS-Lock-Bit-Set-HSFS-W-Asus-or-Other-Mod-BIOS.html
Sorry, I already linked above for you, leaving for anyone reading in future. You need to type this at Grub >> Setup_var 0x8A8 0x0
Then you can reflash stock BIOS region. Or you can simply flash stock BIOS in EZ Flash, if you can enter BIOS.
I see from your image there is error, do it again using above same as before, then see if FPT completes properly or not with backup BIOS region.
If it does, then we can ignore error at grub, if it does not, then we know this setting is not being applied properly ie valid error and BIOS was not flashed I sent you. I suspect this is the case, since I changed that value in BIOS, after flashing what I sent you if it flashed properly then you would not need to change that variable again at grub until after some time later you flash stock BIOS region. Plus, FPT flash image shows only 48KB written, so there is some issue.
Lets do this, once you get sorted out and back to square one with stock BIOS again, send me FPT backup of your stock BIOS region via FPT and I will edit that, and send back to you with command to rewrite entire bios region
FPTw.exe -bios -d biosregdump.bin
Posts: 25
Threads: 0
Joined: Nov 2018
Reputation:
0
(11-19-2018, 12:38 PM)Lost_N_BIOS Wrote: FPT error 368 can be overcome using this guide, any time you flash stock BIOS region you will have to change that again in Grub
https://www.win-raid.com/t3908f16-GUIDE-Grub-Setup-Var-Guide-Fix-Intel-FPT-Error-BIOS-Lock-Bit-Set-HSFS-W-Asus-or-Other-Mod-BIOS.html
Sorry, I already linked above for you, leaving for anyone reading in future. You need to type this at Grub >> Setup_var 0x8A8 0x0
Then you can reflash stock BIOS region. Or you can simply flash stock BIOS in EZ Flash, if you can enter BIOS.
I see from your image there is error, do it again using above same as before, then see if FPT completes properly or not with backup BIOS region.
If it does, then we can ignore error at grub, if it does not, then we know this setting is not being applied properly ie valid error and BIOS was not flashed I sent you. I suspect this is the case, since I changed that value in BIOS, after flashing what I sent you if it flashed properly then you would not need to change that variable again at grub until after some time later you flash stock BIOS region. Plus, FPT flash image shows only 48KB written, so there is some issue.
Lets do this, once you get sorted out and back to square one with stock BIOS again, send me FPT backup of your stock BIOS region via FPT and I will edit that, and send back to you with command to rewrite entire bios region
FPTw.exe -bios -d biosregdump.bin Hi, i did backup and regdump after disable secure boot and change setup_var to 0x0
https://dropmefiles.com/efeBh
Posts: 1,776
Threads: 0
Joined: Aug 2018
Reputation:
42
Is this from stock BIOS, or after you flashed Genius239 last BIOS as mentioned? Please do with stock BIOS, this way no other changes done except ones we make this time around.
Posts: 25
Threads: 0
Joined: Nov 2018
Reputation:
0
It is stock bios, i did downgrade with winflash, and update to last version, after that i disable secure boot and change grub, booted on windows i did backups.
Posts: 1,776
Threads: 0
Joined: Aug 2018
Reputation:
42
Backup of entire BIOS failed, so you cannot write to ME with FPT, will need to be done with FW Update Tool or programmer if you ever need to do ME changes.
Here is new mod, please unlock BIOS Lock in grub again, then reboot to windows and run following command for FPT, show image of command ran and progress, thanks
http://s000.tinyupload.com/index.php?fil...4199140449
FPTw.exe -bios -rewrite -f biosregdumpM.bin
Posts: 25
Threads: 0
Joined: Nov 2018
Reputation:
0
11-19-2018, 09:58 PM
(This post was last modified: 11-19-2018, 10:03 PM by BuP4uk.)
(11-19-2018, 02:10 PM)Lost_N_BIOS Wrote: Backup of entire BIOS failed, so you cannot write to ME with FPT, will need to be done with FW Update Tool or programmer if you ever need to do ME changes.
Here is new mod, please unlock BIOS Lock in grub again, then reboot to windows and run following command for FPT, show image of command ran and progress, thanks
http://s000.tinyupload.com/index.php?fil...4199140449
FPTw.exe -bios -rewrite -f biosregdumpM.bin Done, no changes again.
https://ibb.co/iXQjjf
Posts: 1,776
Threads: 0
Joined: Aug 2018
Reputation:
42
Thanks for sticking with me, Very strange! Nothing new in BIOS anywhere, in any section, and no new sections/duplicates either at all?
Can you please download this package, and run only the top portion of commands for 32/64 one each for each version included, do not run the bottom area command where it mentioned "After edit" Once done with each version's 32 and 64 bit command, send me any/all created NVRAM.txt files.
http://s000.tinyupload.com/index.php?fil...9858283004
Posts: 25
Threads: 0
Joined: Nov 2018
Reputation:
0
(11-20-2018, 02:13 AM)Lost_N_BIOS Wrote: Thanks for sticking with me, Very strange! Nothing new in BIOS anywhere, in any section, and no new sections/duplicates either at all?
Can you please download this package, and run only the top portion of commands for 32/64 one each for each version included, do not run the bottom area command where it mentioned "After edit" Once done with each version's 32 and 64 bit command, send me any/all created NVRAM.txt files.
http://s000.tinyupload.com/index.php?fil...9858283004
resuilts and screenshots in archive
|
Users browsing this thread: 3 Guest(s)
|