(request) asus rog gl502vmk unlock bios options

[hameddashti76]

Then this BIOS maybe RSA Signed or something, or the adv switch messes it up? Do you want me to try to enable chipset only, not switch advanced?  I guess it would be a good test, maybe switching advanced is causing the issue.  If it is, then maybe I can look and see if another way would be possible to add the second advanced.

On your MAIN BIOS page, can you see Access Level?  If yes, what does it say "User" or "Admin"?

* Edit - Here is new set, chipset mod is only goal here + initial test to see if BIOS mod in general breaks BIOS (Maybe signed internally?  Would be unusual for Asus, but best we check.

Please test in this order
BIOSLockOnlyTest  << Can you enter BIOS?  No menu mods here, only unlock BIOS Lock disabled as simple test
BLChipAMITOnly
BLChipAMITBCPA
BLChipAMITBCPU
BLChipAMITSet
BLChipAMITSetA
BLChipAMITSetU

Stop at BIOS you can enter setup + see chipset, no further testing needed once you find that one working.  Let me know it's name.
http://s000.tinyupload.com/index.php?fil...9735443327

Access level : administrator
Flashed BIOSLockOnlyTest.bin and it just go to bios fine. See picture . Going to test others ... 

*Edit
just 1st bin (BIOSLockOnlyTest.bin) is working fine and the other are not work {black screen and cant enter to bios}

[Lost_N_BIOS]

OK, thank you for the testing results! All others you can't enter BIOS?

Maybe UEFITool is breaking the BIOS on rebuild, it would be strange since BIOS Lock module edited is "Setup" module and it's in same volume as AMITSE module that controls the menu's, but I guess anything is possible. Lets try one more round, then if these all fail too, I will use different tool to rebuild the BIOS - this is very odd!

Test any order you want, but stop if one lets you in BIOS and you get Chipset menu
http://s000.tinyupload.com/index.php?fil...7892249423

This method work fine on GL502VS & GL502VMZ, I can't figure out the issue here it all is exact same!

*Edit - here, also try these two if above set fails
http://s000.tinyupload.com/index.php?fil...8155078713

[hameddashti76]

OK, thank you for the testing results!  All others you can't enter BIOS?

Maybe UEFITool is breaking the BIOS on rebuild, it would be strange since BIOS Lock module edited is "Setup" module and it's in same volume as AMITSE module that controls the menu's, but I guess anything is possible.  Lets try one more round, then if these all fail too, I will use different tool to rebuild the BIOS - this is very odd!

Test any order you want, but stop if one lets you in BIOS and you get Chipset menu
http://s000.tinyupload.com/index.php?fil...7892249423

This method work fine on GL502VS & GL502VMZ, I can't figure out the issue here it all is exact same!

*Edit - here, also try these two if above set fails
http://s000.tinyupload.com/index.php?fil...8155078713

First Thanks for trying. But all version's not working. Maybe it's a mistake from my side??
I use FPT for me v11
Is it right version? I check my ME v in hw info
Or maybe i must back to defualt settings in bios first?
Does it matter? 
In black screen i can reboot with Alt+Ctrl+delete
Again thanks  

[Lost_N_BIOS]

It could possibly be some issue on your end, I'm not sure, but I kind of doubt it since the one "BIOSLockOnly" BIOS worked fine.
You have ME FW 11, you checked in BIOS or HWINFO, correct? If yes, then you use FPT from V11 ME System tools package I linked in post #2 correct (Not some other package from other downloads previously, like FTK kit)? Are you using FPTw not FPTwx64? I've seen issue when using x64 version, it's not needed, so if you are using instead of FPTw, then could be causing some issue?

Default setting in BIOS doesn't matter, this can be done with overclock set and many settings changed

Let's try one more time, with MMTool instead of UEFITool for the BIOS rebuilds, this probably wont matter since BIOSLockOnly BIOS was rebuilt with UEFITool too, but last resort thing I can think of that could possibly be breaking the BIOS.

Do you have "Secure Boot" enabled? If yes, disable that before flashing from now on, in case that is causing some issue

Hopefully all of these let you at least enter BIOS now!! Nothing changed in these edits really, only did with MMTool instead of UEFITool. I never have to use MMTool for this, so it would be a first, I hate using it and only do so when forced to for some reason (such as this one if we find it to be the case here.)

Please test in the following order, do not skip any even though my comments below may sound like you should, the ones before my comment to follow may be working fine and starting with the middle ones would be adding unnecessary edits (If not needed)

MMAMITP
MMAMITF << May be first one with Chipset visible, if above one fails but lets you in BIOS

MMAMITPSet
MMAMITFSet << I believe Chipset should start being visible here if not above, but possibly "F" BIOS above too

MMAMITPSetBCPA
MMAMITFSetBCPA *
MMAMITPSetBCPU
MMAMITFSetBCPU **

http://s000.tinyupload.com/index.php?fil...3548416407

[hameddashti76]

It could possibly be some issue on your end, I'm not sure, but I kind of doubt it since the one "BIOSLockOnly" BIOS worked fine.  
You have ME FW 11, you checked in BIOS or HWINFO, correct?  If yes, then you use FPT from V11 ME System tools package I linked in post #2 correct (Not some other package from other downloads previously, like FTK kit)?  Are you using FPTw not FPTwx64?  I've seen issue when using x64 version, it's not needed, so if you are using instead of FPTw, then could be causing some issue?

Default setting in BIOS doesn't matter, this can be done with overclock set and many settings changed

Let's try one more time, with MMTool instead of UEFITool for the BIOS rebuilds, this probably wont matter since BIOSLockOnly BIOS was rebuilt with UEFITool too, but last resort thing I can think of that could possibly be breaking the BIOS.

Do you have "Secure Boot" enabled?  If yes, disable that before flashing from now on, in case that is causing some issue

Hopefully all of these let you at least enter BIOS now!!  Nothing changed in these edits really, only did with MMTool instead of UEFITool.  I never have to use MMTool for this, so it would be a first, I hate using it and only do so when forced to for some reason (such as this one if we find it to be the case here.)

Please test in the following order, do not skip any even though my comments below may sound like you should, the ones before my comment to follow may be working fine and starting with the middle ones would be adding unnecessary edits (If not needed)

MMAMITP
MMAMITF  << May be first one with Chipset visible, if above one fails but lets you in BIOS

MMAMITPSet
MMAMITFSet  << I believe Chipset should start being visible here if not above, but possibly "F" BIOS above too

MMAMITPSetBCPA
MMAMITFSetBCPA *
MMAMITPSetBCPU
MMAMITFSetBCPU **

http://s000.tinyupload.com/index.php?fil...3548416407

I used fptw64 . And now flash with fptw(32bit) and disable secure boot. Flash all version's with your order but no luck. And then flashed biosonlylock.bin and restart to bios. I think to reset to default settings in bios maybe good . Then i restart my laptop and its not boot any thing. I think default setting in boot look might break bios and some errors. Do you have any advise? Or i should give it to asus center? 
Anyway thanks for helping me. I like to have custom things

[Lost_N_BIOS]

Reset BIOS to default before does not matter, but yes, it's ideal to do that once done flashing with any/all BIOS flash (always load defaults after BIOS flash)

BIOSLockOnly.bin you already tested and confirmed OK long ago. So the reason it's not booting now can't be that BIOS, maybe method you flashed or some mistake in flash command etc?

I'm very sorry none of the BIOS I made unlocked the BIOS for you, it's very odd why it's not unlocking on this one while it does on all others!

[hameddashti76]

Reset BIOS to default before does not matter, but yes, it's ideal to do that once done flashing with any/all BIOS flash (always load defaults after BIOS flash)

BIOSLockOnly.bin you already tested and confirmed OK long ago.  So the reason it's not booting now can't be that BIOS, maybe method you flashed or some mistake in flash command etc?  

I'm very sorry none of the BIOS I made unlocked the BIOS for you, it's very odd why it's not unlocking on this one while it does on all others!

hello again. i've been busy with my life.  
i get my laptop back.
in past i flashed BIOSLockOnly.bin and every thing was ok and system start fine and i can enter bios and i restore settings to default and then system dose not post and i send it to repair.
so now this mean i cant use moded bios?
sorry for my bad english

[Lost_N_BIOS]

Good you got the system back, very sorry for all the issues here. Yes, this means I cannot unlock BIOS for you, sorry, I tried everything I know and none worked like it does on GL502VS & GL502VMZ and others. Someone else might know the secret here, but I can't find it, it all looks the same as just as easy to mod/unlock as the others I mentioned which unlock fine.

You'll have to ask Feluci or another member you see that unlocks Asus BIOS here (I can't remember who else does these)

[hameddashti76]

@feluchi
can you help me?

[Lost_N_BIOS]

@tag member doesn't work here, you'll have to send him a PM and link to this thread so he can check and reply or help you in PM