|
Welcome
|
You have to register before you can post on our site.
|
|
|
(Request) Asus BM5275.
|
Posts: 39
Threads: 1
Joined: Apr 2019
Reputation:
0
05-03-2019, 05:35 AM
(This post was last modified: 05-03-2019, 05:36 AM by EscanorX3440.)
backup bios LOST.bin (Size: 8 MB / Downloads: 6)
(04-27-2019, 10:42 PM)Lost_N_BIOS Wrote: What OS are you using? Connect to USB 2.0 if your using 3.0 now, it's not required but just in case it's causing you issues
Did you install the driver in this package? You only need to install this one driver, for all software versions - http://s000.tinyupload.com/index.php?fil...5007472602
What is your BIOS Chip ID? I can tell you what version of software might work best, or which don't, or what ID to use if not exact.
Finally, show me an image of the chip installed into your programmer, so I can verify you have it in correctly.
The driver you send worked like charm, it showed something like verified and buffer matched and I saved it. Here is the file
backup bios LOST.bin (Size: 8 MB / Downloads: 6)
. If there are no chances of bricking in flashing through BIOS the mod file provided by you we can do it that way or through programmer which ever is safe and is less hectic for both of us.
Posts: 39
Threads: 1
Joined: Apr 2019
Reputation:
0
We can do it either through asus ez flash or ch314a programmers whichever is safe and less work for both of us.
Posts: 1,776
Threads: 0
Joined: Aug 2018
Reputation:
42
First, easier method is for me to edit your current BIOS dump to change it's ID, then you program it back. Then you can flash in stock P7H55-M BIOS using standard method, this way will keep all your board NVRAM and serial, UUID, LAN MAC ID etc in place. and I wont have to hunt down a P7H55-M BIOS dump from someone else and edit in your details instead. If this method fails, ie you can't flash in stock BIOS from the mainstream board, after a few mod attempts, then we'll do it the hard way 
Test the BIOS with BCP edit on end of name first, program this in, then boot to BIOS and see if it will let you update to BIOS from P7H55-M regular board (I'm almost curious if these are P55 boards, I see P55 several places in BIOS and BIOS ID's). If that one wont let you do it, or it bricks, then try one without BCP on name (I think this one may fail to allow flash, one BIOS ID Tag I couldn't change with edits done on this one)
If both fail to work, or fail to let you flash in BIOS. Go ahead and program in this other boards BIOS as-is from Asus, and see if your board will run it or not. If it works, I don't see serial in this BIOS, so we may only need to correct your LAN ID if it fails after this process (May be stored in chip not BIOS, so might be OK)
http://s000.tinyupload.com/index.php?fil...2284721626
Posts: 39
Threads: 1
Joined: Apr 2019
Reputation:
0
05-05-2019, 12:20 PM
(This post was last modified: 05-05-2019, 12:23 PM by EscanorX3440.)
The one without BCP edit shows error while flashing. The rom with BCP edit worked and flashed. After that I tried flashing the BIOS of regular p7h55 - m but it shows that the rom is older version than the current bios of motherboard. I think this is due to the regular p7h55 - m bios being dated 2011 and the bios of my bm5275 being dated 2012. Is there any way to flash a bios which is dated older than the current one?
Posts: 1,776
Threads: 0
Joined: Aug 2018
Reputation:
42
05-06-2019, 01:14 AM
(This post was last modified: 05-06-2019, 01:16 AM by Lost_N_BIOS.)
What is the exact name of the BIOS that worked, that let you flash? I will grab an older BIOS and redo.
How are you flashing, you may be able to get around that limitation anyway with current BIOS I sent you.
Also, what was the error shown with the other BIOS?
Ohh wait, so one of them did let you flash in the BIOS I created, correct? And then you updated to regular P7H55-M BIOS? Or, is that what's stopping you now, flashing to regular P7H55-M BIOS? If yes, how are you flashing, with EZ Flash or AFU etc? If EZ Flash is giving you this issue, try flashing with AFUWin V3 or V4 (select Main BIOS Block only) V3 is command line, use this command (AFU.exe biosfilename.bin /P) << If that gives you error about date again >> AFU.exe biosfilename.bin /P /CAF
http://s000.tinyupload.com/index.php?fil...4408379844
If you can't get it, I will redo the original mod again with older BIOS, and or change the date and see if that helps too
Posts: 39
Threads: 1
Joined: Apr 2019
Reputation:
0
05-06-2019, 01:27 AM
(This post was last modified: 05-06-2019, 01:27 AM by EscanorX3440.)
The rom file that ends with BCPedit flashed and later when I tried updating to regular P7h55 - m BIOS is shows a error along the line of "This version older than the current motherboard" YES I am flashing through EZ Flash Ill try using AFU.
Posts: 39
Threads: 1
Joined: Apr 2019
Reputation:
0
I tried using AFUWIN but the software wont open. The 4.0 version shows error loading driver whereas the 3.0 version opens a cmd, shows bunch of commands and says 'press any key to continue' and as soon as you press something it closes the whole program. I tried installing different versions of AFUWIN but none seems to work.
Posts: 39
Threads: 1
Joined: Apr 2019
Reputation:
0
Hey after trying mutilple diffrent versions I was finally able to find a version of AFUWIN working for me but now I am getting the error 46 problem getting flash information. what should I do?
Posts: 1,776
Threads: 0
Joined: Aug 2018
Reputation:
42
command line AFU must be used in a command prompt (you open by select the folder containing the file you are using, hold shift and press right click, choose open command window here) << For informational purpose only, I think you need to use V4. Which AFU V4 worked for you, maybe I have another to send. Actually, here is all 4-5 I have I think, you can try V5 too, I think some now work with V4, unsure but it will tell you if you select a file it wont work with.
http://s000.tinyupload.com/index.php?fil...1252688491
And here is P7H55-M 1302 BIOS with a year newer date than the BCPEdit one you flashed in from your board.
http://s000.tinyupload.com/index.php?fil...9169043784
Posts: 39
Threads: 1
Joined: Apr 2019
Reputation:
0
(05-08-2019, 02:49 AM)Lost_N_BIOS Wrote: command line AFU must be used in a command prompt (you open by select the folder containing the file you are using, hold shift and press right click, choose open command window here) << For informational purpose only, I think you need to use V4. Which AFU V4 worked for you, maybe I have another to send. Actually, here is all 4-5 I have I think, you can try V5 too, I think some now work with V4, unsure but it will tell you if you select a file it wont work with.
http://s000.tinyupload.com/index.php?fil...1252688491
And here is P7H55-M 1302 BIOS with a year newer date than the BCPEdit one you flashed in from your board.
http://s000.tinyupload.com/index.php?fil...9169043784
AFU V5 works but when I try to open the ROM file it says "error bios doesn't support process ME information". I even tried using EZ flash I got the same error I got last time 'The rom file version is older than the motherboard BIOS'. I tried using CMD there it says error 46 Problem getting flash information. What should I do next?
|
Users browsing this thread: 8 Guest(s)
|
![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
![[Valid RSS]](valid-rss.png "Validate my RSS feed")