05-10-2019, 06:20 AM
Rubber band around the tip? Or, you can pinmod to unlock the FD, then dump FD, unlock it, and write it back,
Here's how to do the pinmod, see section E1 - https://www.win-raid.com/t3553f39-Guide-...icing.html
Once done, get into windows and dump FD with FPT >> FPTw.exe -desc -d fd.bin
Edit that fd.bin via hex per the same link above, see section "B" , second spoiler 1st image (line 60 edit)
Then flash it back via >> FPTw.exe -desc -f fd.bin
You need the FPT from V8 R3 in this thread at section "C"
https://www.win-raid.com/t596f39-Intel-M...Tools.html
FPT must be ran from an admin command prompt, here's how to open one at FPT location - inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).
If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges
Here's how to do the pinmod, see section E1 - https://www.win-raid.com/t3553f39-Guide-...icing.html
Once done, get into windows and dump FD with FPT >> FPTw.exe -desc -d fd.bin
Edit that fd.bin via hex per the same link above, see section "B" , second spoiler 1st image (line 60 edit)
Then flash it back via >> FPTw.exe -desc -f fd.bin
You need the FPT from V8 R3 in this thread at section "C"
https://www.win-raid.com/t596f39-Intel-M...Tools.html
FPT must be ran from an admin command prompt, here's how to open one at FPT location - inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).
If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges