[Request] Asrock Fatal1ty 990fx Killer Version 1.60 Bios Unlock

[M1chb3ltr3]

Manufacturer : ASROCK



Model :  fatal1ty 990fx killer

Bios Type : AMI EFI

Bios Revision : Version 1.60

Bios Link: http://asrock.pc.cdn.bitgravity.com/BIOS...60)WIN.zip


Thanks

[Lost_N_BIOS]

Asrock doesn't usually hide many BIOS settings, what are you thinking your missing? You'll have to add some images of your BIOS so we can see what is visible to you already.

[M1chb3ltr3]

picture 1) https://imgur.com/a/GkxBLw1

picture 2) https://imgur.com/a/gjDrAAj


i had the 1.30 bios in the past and it was unlock and i had a bunch of stuff to play with in the overclocking section.

[Lost_N_BIOS]

Thanks for info, images of BIOS is only way I can know for sure what you can't see. Even if you said 1.30 showed lots of settings, but 1.60 doesn't, I'd still need to see images of what areas you needed more settings added back into. So, I still need a zip archive then of all the pages, sections, showing all currently visible settings where you need them added back into. The pages you showed images of are OK and will help, but for example OC Tweaker I can only see the top of what you see, need to see scroll so all settings you can see are visible, so needs pic 2, and if necessary pic 3 of that page so I can see it all.

[M1chb3ltr3]

this is everything that is in the oc section


https://imgur.com/a/zlidaVk

[Lost_N_BIOS]

Thanks! Do you have flash programmer, or no? If not, we'll skip trying to enable chipset for you, just in case it causes need for recovery. If you have programmer, I can enable it, but we may need to test a few ways first.

As for now, I enabled a few subsections in advanced, and I enabled some things in OC Tweaker, but you need to change from auto to manual first so I can see what is visible for you and what's not, then I can unlock the rest. Show me new images of OC tweaker after you flash this BIOS, put overclock mode to manual first. Also, pay attention in your new images, I think you missed some in the middle of OC Tweaker in last two images. Due to that, and overclock mode on auto, I didn't enable many things here yet (only 2-3 I think)

Also, add some images of everything you can see within DRAM Timing Config section too.

Do not rename file, update it from USB using the built in BIOS flasher within the BIOS
http://www.filedropper.com/fewchanges

[M1chb3ltr3]

Thank you so much, i was able to unlock a few options in the oc section



https://imgur.com/a/ozUitvT

this link contains all the pictures, after changes and also the ones that you told me to take.

[Lost_N_BIOS]

You're welcome! So, do you need me to do anything else now, or did you see how to unlock stuff and can get it from here?
If you need me to do stuff still, next time please zip images if I need to see anymore.

[M1chb3ltr3]

I dont know if there is more stuff to unlock if you can unlock more ill appreciate it.

[Lost_N_BIOS]

I didn't check, your post sounded like you unlocked some more after I sent you that file above. Did you, I mean did you edit BIOS again? If not, then yes I can still unlock more, I'll check your images again and get back to you later on

Still missing images from inside "Dram Timing Control' Be sure to show me all settings inside there so I can add any missing timings