unlocking packard bell imedia s3810 with a P01-A3 AMI bios.

[taquilla69]

Hi, please can some one help me unlock my bios. i have packard bell imedia s1710 with a P01-A3 AMI bios. (version v02.61)

Is this version working with it ?
Also, how can I flash it ? (newbie, sorry)

Thanks a lot.

==========================================

Congratulations , you now have overclocking / hyperthreading / virtualization settings under Frequency/Voltage Control

Flash at your own risk!

http://dl.dropbox.com/u/747181/Packard%2...34s282.zip

Regards
Admin

[matteo0026]

Hi, please can some one help me unlock my bios. i have packard bell imedia s1710 with a P01-A3 AMI bios. (version v02.61)

Is this version working with it ?
Also, how can I flash it ? (newbie, sorry)

Thanks a lot.

==========================================

Congratulations , you now have overclocking / hyperthreading / virtualization settings under Frequency/Voltage Control

Flash at your own risk!

http://dl.dropbox.com/u/747181/Packard%2...34s282.zip

Regards
Admin

Hi guys, can someone reupload that BIOS? I need it, I have same packard bell PC...

[matteo0026]

Please help me:
entering in Integrated Peripherals menu, the item "Onboard Graphics Controller" (Disabled/Enabled) is grey and I can't choose to enable the onboard vga. If I choose to use Primary Video onboard from dhe Advanced chipset Features, the Onboard Graphic Controlled becomes enabled, but the pci-e vga card is not functioning.
Is it possibile to mod the bios so I can use the onboard vga and the pic-e vga cards togheter? (I need to connect three monitors)
I hope you can help me.

Sorry for the delay ive been quite busy outside this site!

I have edited the mod id already done to set the Onboard Grpahics Controller from "Shaded" to "show" so it should now be editable

Flash at your own risk!

http://bios-mods.com/BIOS/AMI/Packard%20...s282_2.zip

http://dl.dropbox.com/u/747181/Packard%2...34s282.zip

Regards
Admin

I tried to flash this but it seems it bricked my mobo... I don't know why, the model was the right one... At boot it doesn't show POST and nothing sound... I tried to reset the setting by removing the CMOS battery but nothing...

[tankabella]

is there unlocking bios for packard bell m3720 with motherboard mcp73pvt-pm? Please reply.