Posts: 1
Threads: 0
Joined: Apr 2021
Reputation:
0
06-23-2021, 08:36 AM
(This post was last modified: 10-15-2022, 05:15 PM by Rollo3647.)
for any other who wonder why 6126F don't work on that X11DPT-PS.
Supermicro has dropped OmniPath Fabric support on boards manufatured after juli 2018.
In the F type processor are two DIE, the CPU-DIE and the Fabric controller-DIE(Intel Corporation Omni-Path HFI Silicon 100 Series)
The Fabric controller (CD=companion die) is not powered anymore.
If you try a F CPU on a non supporting mboard you will get the following issue:
does not work at all.
one or both CPUs, were running at 700MHz or lower.