eMachines EL1870 (H61H2-AD): Ivy Bridge Support

[Nigo226]

I have a Mainbord with intel h61 chipset with Sandy and Ivy-Bridge Support. The Bios suppports only Sandy-Bridge. Can a Modder the Bios from the Zip Modden, Delete Celeron And Pentium Microcodes and import Ivy-Bridge Microcodes.
And activate all possible OC options.
Thanks

  BIOS_eMachines_P01.A3_A_A.zip (Size: 2.57 MB / Downloads: 15)

[DeathBringer]

Celeron & Pentium use the same microcode with i3 & i5 & i7.
Adding microcode will not add support for Ivy Bridge
H61 chipset doesn't support overclocking.
Make a good photo of your motherboard.

Have you a hardware programmer to flash BIOS?

[Nigo226]

I use the Original flashprogramm. The Chipset support Ivy-Bridge the Bios not (OC only Activated wen is disable z.B Memory Frequenz)
Please Enable Ivy-Bridge Support. Celeron and Pentium have not the self Microcode i3, i5 and i7 have Hyper Treahding

Speak You German
Bord is a H61H2-AD

[DeathBringer]

Make by your programmer, zip and attach current BIOS dump.
Read BIOS chip on your motherboard by hardware programmer, like CH341A or TL866.

[Nigo226]

I have not CH341A or the other i have the bios from the website
can you not the original bios from the Zip modden that i flash the bios

[DeathBringer]

Official BIOS update can't help. It's incomplete.

[Nigo226]

? it's not Complet i can not help here the PC's with the Bord
Aspire X1930, X3990
EL1870