Hello! I'm looking to figure out what's going on with this BIOS.. I have a CH341a and I dumped a good copy of the existing BIOS (attached). I made various changes in AMIBCP (you need to use 5.2.0031 for this BIOS) and nothing will stick.. no new menus show up.. I'm assuming there might be more to it than I think? Hex editing perhaps? I clearly don't know what i'm doing.. I set many many things to USER in the bios and flashed it and it bricked my system entirely.. So I reflashed the stock BIOS and i'm back up and running..
I will pay a bounty for this!!!!
Things of note; this has the newer 11th gen Intel CPU of which Throttlestop cannot see the FIVR so i'm not sure if this is a block in the BIOS or an 11th gen specific thing. So ultimately in the very least I just want BIOS level undervolting and that would be sufficient for me. GPU wattage/voltage changes (if possible) would be nice as well but that can probably be handled through a VBIOS elsewhere.
Thanks!
I will pay a bounty for this!!!!
Things of note; this has the newer 11th gen Intel CPU of which Throttlestop cannot see the FIVR so i'm not sure if this is a block in the BIOS or an 11th gen specific thing. So ultimately in the very least I just want BIOS level undervolting and that would be sufficient for me. GPU wattage/voltage changes (if possible) would be nice as well but that can probably be handled through a VBIOS elsewhere.
Thanks!