Asus ROG GL502VS Unlock Request

[BuP4uk]

RealGM - I only meant maybe that (0x65D) needed to be enabled before the other settings would apply.  "Chipset" or Second "Advanced" (I forget where it's at and don't have BIOS open right now) would need to be visible for that setting to actually make a menu appear or disappear.  Good you were able to get -140 applied, and it's great this is making less BSOD's for you!  Where is voltage shown in that image I can't see it, what was voltage before and after?  I thought maybe BuP4uk had something incorrect, and it seems so due to his reply above

BuP4uk - reset CMOS, if that does not work, do long reset CMOS (Remove main battery, unplug from wall/power block, press and hold power on button for one+ minutes), then see if it will start or not.  If not, you will have to do extended clear, all that I just mentioned plus remove CMOS battery and leave all without any power for 8-12 hours.

Are you in correct EFI-Shell/grub, all black and gray text (no yellow text anywhere)?  Difference between 0.115 and 0.140 is not enough to cause the system to not function, max negative value wouldn't even do that.  Sounds like you possibly entered and incorrect value and caused some error.  Correct value for -140 would be 0x8c

Hi again

Can you write which commands in order I need to enter into GRUB to reduce the voltage by -130mV to avoid errors on my part? I tried -140mv in windows and it worked perfectly.
a im again kill my system

[okokokok]

anybody have benchmark results & temperature differcences?
it would be nice if we share the results and configs because we all have the same device.

for examplpe my results for some benchmarks are like this in a notepad file each wich settings or drivers updated:

-------------------------------------------------------------------------------------------------

Cinebench 15---------------------------------------------------------------------------------

CPU           664        663     678p         662        682         678

CPU Single 149         ....      145p         147        149         144
openGL       ....         ....      104,12      109,38    106        105,97

Furmark ROG---------------------------------------------------------------------------------

OpenGL score      ...     ...         4461p         4487      4445        4445      4501

OpenGL fps       ...       ...           74fps         74             74         74          75

geekbench4-----------------------------------------------------------------------------------

CPU Single-Core Score   ...         ...         4596         4583         4586

CPU Multi-Core Score    ...         ...        14698         14689        14625

GPU OpenCL Score        ...         ...       160576         159666        158153

-------------------------------------------------------------------------------------------------

its not that precise and have made some mistakes in the powerconfigs just wanted to know what decreasing performance the most during my setup (stock/drivers/windows update/asus bloat/manual drivers updates/win settings)

would be nice if someone tell me if the results are too low or share their results and configs made to everyone as simple as possible.

(i will do the XTU -150 / more today and edit it here.)

[frosti7]

eshield, well done for the OC.

How difficult is it to mod ME region to achieve OC capability? how dangerous is it?
newbie hereThanks!

Also, have you managed to gain any performance with the OC? given heat restrictions etc...

There is no BLCK overclocking in this mod too. ICC profiles are stored in your ME region. So if you want some OC you have to dump and mod your ME region by yourself. Even if you mod n flash ME you wont get BLCK oc in BIOS itself. BLCK oc will be available in tools like Intel XTU. 

[/quote]

[john_matrix]

Hello,
Can someone confirm that the modded 306 BIOS from eshield let the laptop boot even with a SSD connected to the SATA port?
I would like to try it but my Windows install is on the 2.5' SSD and have a NVME SSD in the M2 port.

Thanks in advance!

[Zero_cool]

Hello,
I just saw that some had managed to unlock the bios.

Is it the bios for the asus GL502VS (with the i7 6700qm and 1070GTX)?

Has anyone here managed to modify the latest one, version 306?
If not, here is the source file:
https://www.transfernow.net/Z5U1yB022021

Can someone unlock it for me and send me the procedure to flash it from the windows asus utility or from the bios utility?

Thank you in advance,
Zero_cool

[Asusrox]

Hi just curious but did this work out for you? I have the same model as well. Could I take the same steps and proceed?