HP Pavilion zd8000: CPU Upgrade

[BadTad]

I currently have an HP ZD8000 with i915P chip set w/ p4 650.

The mfg supports up to 660 - I wish to use 670 or 672. The chip set supports both, the bios does not.

My bios can be found here;
ftp://ftp.hp.com/pub/softpaq/sp31501-32000/sp31537.exe

Intel's own motherboards supporting the i915p are;

CY91510A.86A Intel® Desktop Board D915PSY
CY91510A.86A Intel® Desktop Board D915PGN
DT91510J.86A Intel® Desktop Board D915PDT
CY91510A.86A Intel® Desktop Board D915PCY
CY91510A.86A Intel® Desktop Board D915PCM
CY91510A.86A Intel® Desktop Board D915PBL
VG91510A.86A Intel® Desktop Board D915PLWD

I'm not sure if they all support the 672 or not, but the intel 915p chip set does so I would 'assume so' you can select one of their bios from this link;

http://www.intel.com/support/motherboard...39.htm#915

I deffer to your judgment as which bios would be the best for my situation.

EDIT: noticed @ http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=1681&DwnldID=11843&lang=eng
This download is also valid for the products listed below. Use the links below for additional product downloads:

Intel® Desktop Board D915PBL
Intel® Desktop Board D915PCM
Intel® Desktop Board D915PCY
Intel® Desktop Board D915PGN
Intel® Desktop Board D915PSY

I am also keenly interested in increased the supported memory to the max allowed by the chip set ( I believe this is 8gb, currently limited to 2gb, would be happy with 4gb! )

I would be happy to donate should you be successful!

[1234s282]

We cannot modify Intel Bioses , as they are their own individual format , neither ami , award or phoenix

Regards
Admin

[BadTad]

Not a problem friend, this MSI board also utlizes the same chipset and supports my requested CPU and memory allotment

http://www.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=154

[TheWiz]

Uhhh.... the link to your BIOS in the original post is for an ATI graphics card bios?

[BadTad]

not that I'm aware of, though there is ati x600 built into the board, the page with the link is here;

http://h10025.www1.hp.com/ewfrf/wc/softw...ob-36776-1&lc=en&dlc=en&cc=us&product=1137817&os=228&lang=en

Very hopeful that my bios can be modded to support p4 672 chip and more memory, as the i915p chipset itself supports both

I would be curious if there's any options in the bios that have been hidden/disabled that might give me some better choices.

---

PS: some work has been done previous to this bios here;
http://www.bios-mods.com/showthread.php?tid=1156

I would also enjoy slic 2.1 enabled/added

[1234s282]

We cannot modify Intel Bioses AT ALL!

Sorry!

[BadTad]

Which Bios is the problem?

I'm a little confused as my bios was previously edited here;
http://www.bios-mods.com/showthread.php?tid=1156

And the BIOS I referenced here;
http://www.msi.com/index.php?func=downlo...rod_no=154
is 'AMI' - if needed I can find a different reference bios..

So please tell me, which bios is the problem?

[1234s282]

Sorry , from the big list of intel boards in your post i assumed you only had a intel bios , which isnt ami or award or phoenix so we cant mod

You have a phoenix bios , its already been modded for SLIc and we cannot unlock phoenix bioses yet

Regards
Admin

[k24a1]

BIOS link: https://ftp.hp.com/pub/softpaq/sp31501-32000/sp31537.exe

The laptop will power on, and then shut off when a Cedar Mill CPU is installed. The latest F34 BIOS has also been installed on the computer.

The desired CPU spec is SL9KE, a Pentium 4-HT 651 on the D0 stepping with a maximum TDP of 65 watts. (EDIT: CPUID is F62, F64, and F65 across all cedar mill CPUs. SL9KE uses F65)

Attached are screenshots from AIDA64 showing my current CPUID (Prescott-2M P4, 3.4GHz), Motherboard, and chipset (which is an Intel i915P).

I would also like to note that I have installed a custom BIOS on here which allows me to install more than 2.5GB of RAM. Obviously, that's off-topic considering I am posting in the CPU upgrade forum, but the files are on the ZD8000 RAM thread in the Phoenix Unlocking forum if anyone wants to make a patched BIOS with both Cedar mill and >2.5GB RAM support. There was also a de-whitelisted BIOS somewhere, but that's been lost.

These laptops have 2 different BIOS files depending on what graphics card your system has. One is 3082F34.M22 for ATi Radeon X300 systems, and 3082F34.M24 for X600 systems. They should be just about the same aside from different video BIOSes on hand.

If anyone owns a cedar mill CPU and an NX9600/zd8000/X6000 and are willing to test certain things out alongside me, that would be very helpful!

Thank you for taking the time to read through this. With cedar mills in these exotic laptops, we can have at least 30% less heat output, and could make these laptops run at least somewhat better.

[DeathBringer]

At first try to find Phoenix BIOS with support of Cedar Mill for any motherboard base on 915P chipset.