The case looks like this:
There is only an SSD drive in the laptop, there are no removable devices (only one usb stick).
1. After an unsuccessful flash, when trying to recover and downloading the BIOS from the HP website to my model and uploading the 017FC.bin file to the pen drive, starting the laptop without pressing the windows + v or windows + b keys or with these keys, the diode on the opendrive flashes for a while, LED on capslock stops and starts blinking twice, there is no restart of the laptop.
2. after uploading files from you to the pen drive, after starting the laptop without pressing the keys and with pressed Windows + v, Windows + b the same happens. The LED on the pendrive is flashing for a long time (about 20-30 seconds), the laptop is restarted and the caps lock LED starts flashing a time. If I leave the flash drive, it is read, then restart the laptop. And the same thing again.
I think the BIOS you sent is not for my model? I understand that the bin files downloaded from the HP website do not flash due to the lack of signatures (sig, rsa). I tried to replace the bin files downloaded from HP with the bin files sent by you, unfortunately then it happens as in point 1 (without rebooting). Files from HP and files from you vary length size. (4736896 / 4329472).
Is it possible to sign bin files downloaded from HP website?
Previously I had the F.1C version, now I can't find it on the HP website, it's only F.1B
https://support.hp.com/pl-pl/drivers/sel...ku=A1U54AV