Login

quarkpower · (This post was last modified: 04-07-2023, 01:41 PM by quarkpower.)

This is the right dump from that one (just dumped it again):

https://mega.nz/file/34tVUa7R#sgJ2sxK1AT...Jj1Xk82jd4

Edit: just opened it with AMIBCP and it is, but didn't work with the M2 BIOS. The dump doesn't match the original A1.bin either, any clue of how should I flash it?

***DeathBringer*** · (This post was last modified: 04-09-2023, 03:00 AM by DeathBringer.)

It seems good.
It's BIOS for D3289-A1

quarkpower · (This post was last modified: 04-07-2023, 02:02 PM by quarkpower.)

it is the original dump
It starts matching from 00501F20 on the UDP file and 00001EE0 on the dump (onwards)
I did flash the b1.UDP file yesterday and didn't work...

quarkpower · 04-08-2023, 06:25 PM

Got the microcode updated with MMTOOL in the dump but it doesn't boot even with the v3 cpus. Is it possible that I did neglected the register configuration and now it is bricked?

***DeathBringer*** · (This post was last modified: 04-09-2023, 02:56 AM by DeathBringer.)

Adding microcode will not add support for new CPU.
Make new dump with you can boot.

quarkpower · 04-10-2023, 01:48 AM

(04-09-2023, 02:56 AM)DeathBringer Wrote: Adding microcode will not add support for new CPU.
Make new dump with you can boot.

So... what do I need to do for it to work? or it is not possible?

***DeathBringer*** · 04-10-2023, 02:42 AM

(04-07-2023, 01:51 PM)quarkpower Wrote: It starts matching from 00501F20 on the UDP file and 00001EE0 on the dump (onwards)

So I need to see a bootable BIOS dump.

Login
Username:
Password:	Lost Password?
	Remember me